467092
99
Zoom out
Zoom in
Previous page
1/103
Next page
Linear Mix: a mix that maintains the same relationship of master to slave throughout the whole range. Ex: a mix from
one flap servo to another flap servo at 100% causes the 2nd servo to follow the first servo’s movement exactly through
all points of travel. See Programmable mix.
LINK: mixing function that allows multiple mixes to work in conjunction. See Programmable mix.
Lithium battery: see Backup battery.
Linear: linear, directly proportional. See AIRBRAKE.
Low Band: 72MHz equipment on a channel from 11 to 35. Receiver channel may be changed to any channel within the
low band without needing retuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
LOW BATTERY warning: transmitters battery is below a safe flight voltage. Recharge immediately. See Error messages.
Low rate: see D/R, EXP.
MANUAL: controlled by a switch. Ex: see AIRBRAKE.
Master: the primary control. See Programmable mix.
Mechanical gyro: uses a mechanical gyroscope (like a child’s toy gyro) to sense change of angle. See Gyros and
Governors.
MEMORY MODULE INITIALIZE: warning to indicate that the CAMPac installed in the port is not yet formatted or formatted
for a different model of transmitter. Pressing the MODE BUTTON initializes the CAMPac, deleting any existing data and
formatting the CAMPac for use in the 9C. See Error codes.
MHz: Megahertz. Unit used to express frequency. 72MHz channels are aircraft only frequencies; 75MHz are ground model
only frequencies; 27MHz are air and ground both. 50MHz is legal for HAM amateur license holders. See Frequency.
Mix, mixing rate, mix offset, mix links: See Programmable mix.
MIXER ALERT warning: notifies user that a mix is activated which is not considered desirable for engine startup. See
Error messages.
Mode: definition of which channels are assigned to which S
TICK
movements. All 9C radios shipped in the US are Mode
2, with elevator and aileron on the right STICK. To change mode, please visit www.futaba-rc.com.
M
ODE/PAGE BUTTON
: control button on radio’s face used in various parts of programming. . . . . . . . . . . . . . . . . . . . . .11
MODEL COPY: used to duplicate the settings of one model already in memory into a second model memory. Often used
to set up 2 similar models, or make a copy of a working model to experiment with new setups. Also used to copy
models to/from the CAMpac data storage unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
MODEL NAME: gives each model memory an 8-character name for easy recognition. In MODEL submenu. . . . . . . . . . .27
MODEL RESET: restore all data in a single model memory to defaults, including name and model type. See RESET.
MODEL SELECT: choose the model memory you wish to modify or fly. In MODEL submenu. . . . . . . . . . . . . . . . . . . . . .25
MODEL SELECTION ERROR: the memory last loaded in the transmitter is not currently available (usually because it is on a
CAMPac not currently in the transmitter). See Error messages.
MODEL TYPE: select the type of model the aircraft is, including airplane, 2 glider types, and 5 heli types. . . . . . . . . . . .28
MODUL: modulation, means of transmitting data (PPM, PCM). In PARAMETER submenu. . . . . . . . . . . . . . . . . . . . . . . .31
Module: electronic component which can easily be removed/replaced into the transmitter, which houses all transmission
components. Transmission frequency can be safely, legally and easily changed (including from band to band) by
changing the module. TP-FM is the standard module, available on any 50MHz or 72MHz frequency. You may also
purchase TJ75FM for ground use, 75MHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Name: see MODEL NAME.
Neckstrap: optional strap to suspend transmitter during use. Futaba stock # FTA8. See Accessories.
99
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Robbe 9CAF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Robbe 9CAF in the language / languages: English as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Robbe 9CAF

Robbe 9CAF User Manual - Dutch - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info