592102

Roadstar TTL-850USDE Manual

5
Zoom out
Zoom in
Previous page
1/9
Next page
EnglishEnglish 5 6
TURNTABLE OPERATION
Preparation
Open the Record Player Cover.
Listening to Records
5. Lift the Tonearm with the Tonearm Lift Lever.
6. Move the tonearm to the beginning of the record, or to the start of a particular track.
7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing.
8. When the record is finished the tonearm will automatically stop and return to the rest .
9. To stop manually, lift the tonearm from the record and return it to the rest.
to the Tonearm. Reinstall the protective cap on the stylus when not in use.
How to suspend play
Setting the cueing lever to the UP position will lift the tone arm and then the play stops.
How to use manual cueing
The cueing lever is used when you want to momentarily interrupt the tone arm. Move the
lever gently to the "UP" position to interrupt the playing and to the "DOWN" position to
resume playing.
Keep the cueing lever in the down position when you are not using it.
central spindle when playing 17cm EP records.
3. Set the Speed Selector (5) to 33 or 45 rpm according to the record.
4. Release the tonearm clamp, and remove the protective cap from the stylus.
1. Set the power ON/OFF SWITCH (3) to ON position.
2. Place a record on the turntable, over the central spindle. Place the EP adapter over the
ENCODING OF PHONO INTO MP3 FILE
-The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
- No song title will be recorded during encoding mode
- To interrupt the recroding, press the “ RECORD “ button again during record mode.
the USB or SD/MMC card.
The system is able to ENCODE TURNTABLE to MP3 format and recording at memory
media with USB / SD / MMC connecting port.
REMARK:
- The recording speed is 1:1 and according to the actual plying time of the track
- The system will creat a “ AUDIO “ folder and then store the encoding track in it.
10. To automatically stop the record, press the “EJECT” button (15).
Notes: Do not stop or turn the platter manually.
Moving or jarring the turntable without securing the Tonearm clamp could result in damage
PHONO ENCODING
Start playback at PHONO for the track which you want to record to USB.After
finishing of recoding, press and hold the “ RECORD “ button on the unit (12).
-Recording will be completed only entire song being encoded, if terminate the
encoding process intermediately, there is no track being recorded nor stored to
LED
USB Record Operation and LED Signal Indication:
1. USB storage device is not plugged. -> LED light is off
2. USB storage device is plugged in -> LED flashes
3. When the system is ready to record. -> LED light is on
4. Press REC button to start recording. -> LED blinks slowly.
5. Press SPLIT button to create new file in the recording.
6. Press REC button again to stop recording. -> LED is flashing for a short
time, and then LED light stably lights on again.
Note: Do not remove the USB storage device if the LED is flashing.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar TTL-850USDE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar TTL-850USDE in the language / languages: English, German as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info