Manual Roadstar HRA-500IP (page 6 of 38) (English, German, French, Italian, Portuguese, Spanish)

471594

Zoom out

Zoom in

1/38

EnglishEnglish

• The tuner will stop scanning when it finds a strong signal.

• Repeat this process until the desired station is found.

Notes: As automatic tuning depends on the signal strength of the transmitters, weak

transmitters are sometimes skipped. In such a case, tune manually to find the

weaker transmitters.

On the other hand, with a very strong signal, the tuner may stop before it reaches

the optimum setting. Tune manually for the best reception.

Storing Stations (from Remote Control only)

This unit allows you to store the frequencies of up to 20 radio stations in the memory;

• First tune into the station you want to store using one of the methods above.

• Then press the Preset Menu button (11) on the remote control (17).

• Press PRESET-UP or PRESET-DN Buttons the remote control (3,4) to select the desired

channel memory and press the Preset Menu button (11) within 5 seconds to store it.

To reprogram a preset station repeat the procedure above.

Selecting a preset station

To select a preset station,

press the Jog/Mode button and turn the Volume/Tune knob on main

unit or press the PRESET-UP or PRESET-DN Buttons on the remote control (3,4) until the

desired preset program is displayed.

FM Stereo Reception

When an FM signal is tuned in, the ((( ST. ))) indicator will appear in the display.

In case of noisy reception, if you push the PLAY/PAUSE MONO-STEREO button (9) to FM

MONO position, the FM STEREO indicator will turn off & switch to MONO FM status.

Antenna

For FM reception there is a wire antenna (17) at the rear of the unit. Extend it for best reception.

SLEEP FUNCTION (by remote control)

1. If you want to fall asleep to music, press the SLEEP button .

2. You may select the TUNER, iPod orAUX mode in sleep function to play from 90, 80, 70 up

to 10 minutes of music before shutting itself off automatically.

FUNCTION SELECT

1. Press repeatedly the FUNCTION button (12) on the unit or on the remote control (9) to

select the desired. Display changes as: iPod - TUNER - AUX-IN.

FM RADIO OPERATION

Operation

• Press the STANDBY Button on the unit (23) or the remote control (1) to turn the unit on.

• Select the TUNER function with the Function Button on the unit (4) or on the remote control (9).

• There are a number of ways that you can tune to radio stations. Follow the instructions

in the sections below.

• Adjust the VOLUME to the desired level using the VOLUME -/+ Knob (15) or the VOLUME

-/+ Buttons (8,21) on the remote control .

• To turn off the radio, press the STANDBY Button again.

Manual Tuning

Manual tuning is useful when you already know the frequency of the desired transmitter.

• To change the frequency, repeatedly press the TUNE/CLK+ or TUNE/CLK- from Remote

Control until the precise frequency is reached.

• From the main unit press the Jog Mode button (19) and rotate the Volume/Tune knob until

the precise frequency is reached.

Automatic Tuning

• Press and hold the TUNE/CLK+ or TUNE/CLK- Buttons for about a second. The radio

will start automatically scanning for strong radio signals. The TUNER Display shows the

frequency in MHz for Fm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HRA-500IP in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roadstar HRA-500IP Manual

Product: