471594

Roadstar HRA-500IP Manual

4
Zoom out
Zoom in
Previous page
1/38
Next page
EnglishEnglish
on the main unit.
When there is a strong ambient light source, the performance of the infrared Remote Sensor
may be degraded, causing unreliable operation.
The maximum effective distance for remote control operation is about 5 metres (16.5 feet).
REMOTE CONTROL
1. STANDBY BUTTON
2. MUTE BUTTON
3. PRESET Radio UP BUTTON
4. PRESET Radio DOWN BUTTON
5. BACKLIGHT BUTTON
6. SKIP/TUNING/SEARCH DOWN BUTTON
7. DISPLAY BUTTON
8. VOLUME DOWN BUTTON
9. FUNCTION BUTTON
10. SNOOZE / iPOD ENTER BUTTON
11. PRESET / MENU BUTTON
12. ALARM BUTTON
13. PLAY/PAUSE (only iPod) BUTTON
14. EQ BUTTON
15. SKIP/TUNING/SEARCH UP BUTTON
16. BASS BOOST BUTTON
17. VOLUME UP BUTTON (21)
18. SLEEP BUTTON
CLOCK SETTING
In the STANDBY mode:
1. Press and hold the CLOCK/DISPLAY button (13) until the time display changes to 12-hour
digit and will flash.
2. Press theTUNE/CLK+ or TUNE/CLK- button (16,14) to adjust 12-hour or 24-hour digit.
3. Press the PLAY/PAUSE/FM button (9), the HOUR digit will flash on the display,
press the TUNE/CLK+ or TUNE/CLK- button (16,14) button to adjust HOUR digit.
4. Press the PLAY/PAUSE/FM button once more, the MINUTE digit will flash on the display,
press the TUNE/CLK+ or TUNE/CLK- button (16,14) button to adjust MINUTE digit.
34
Caution
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
Safety Precaution
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: AC230Volts / 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not
required.
POWER SUPPLY
Remove the stereo carefully from the box, retaining the packaging for future use.
Read these instructions carefully before use.
Connections
Connect the Mains Lead to an AC outlet. Check that your mains supply is 230V, 50Hz.
Extend the FM antena on the rear of the unit (11).
Disconnect the power cord from the mains if the unit is not going to be used for some time.
BATTERY INSTALLATION
Insert one CR-2032 battery into the battery compartment of the remote controller and replace
the cover.
BATTERY REPLACEMENT
When the batteries become too weak, the
operating distance of the remote controller
is greatly reduced and you will need to replace
the batteries.
Notes: To maintain the accuracy and long life
of the transmitter, do not press two or more
Buttons simultaneously.
If the remote control is not to be used for a long time, remove the batteries to prevent possible
damage through leaking batteries.
USING THE REMOTE CONTROLLER CORRECTLY
Point the remote controller at the Remote Sensor (10).
The functions of the buttons on the remote control are the same as the corresponding controls
1
5
6
7
4
2
18
9
15
10
3
12
16
17
13
11
14
8
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HRA-500IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HRA-500IP in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info