592277

Roadstar HIF-1902HP Manual

8
Zoom out
Zoom in
Previous page
1/33
Next page
English English 9 10
2. Press “ record “ button (9) twice during the playback of the desire track,
unit will display. Encoding is performing now.
3. Press the STOP button to finish recording the track.
Encoding 1 disc:
1. Place a cd with the printed side facing up inside the tray & then close
the co door
2. Press the RECORD button (9) twice after focus search completed. unit
will display “REC”. Encoding is performing now.
3. After completing of encoding, unit will stop playback automatically.
Remarks:
The recording speed is 1:1 and according to the actual plying time of the
cd track.
The system will creat a “ RECORD “ folder and then store the encoding
track in it.
The recording format is preset at – mp3 bit rate: 128 kbps, sampling rate:
44.1khz.
No song title will be recorded during encoding mode.
To interrupt the recroding, press the “ record “ button again during record
mode.
Recording will be completed only entire song being encoded, if terminate
the encoding process intermediately, there is no track being recorded
nor stored to the usb.
Copying of MP3/WMA file
If putting a mp3/wma disc instead of a cd-disc, the system will copy the files
to the usb or sd card if press the “ record “ button (9). The operation proce-
dures is same as cd encoding as stipulate on above, and the system will
switch to copying mode only if mp3/wma file being read.
PHONO ENCODING
1. Insert the USB device.
2. Press the function button to “ phono “.
3. Start playback at phono for the track which you want to record to usb.
4. Press the RECORD button two times to start encoding.
5. The display show REC.
6. After finish of recoding, press the STOP button to stop recording.
CASSETTE ENCODING
1. Insert the USB device.
2. Press the function button to “TAPE“.
3. Start playback at TAPE for the track which you want to record to USB.
4. Press the RECORD button two times to start encoding.
5. The display show REC.
6. After finish of recoding, press the STOP button to stop recording.
REMOVING OF USB / MEMORY CARD
To remove the usb, turn off the power or switch the function mode to either
cd, aux or tuner first. Un-plug it by pulling out the usb socket directly.
DELETE TRACKS FROM USB
1. Insert the USB device.
2. Press the function button to “CD/USB “.
3. Press the button FUNCTION to select USB device.
4. During playback or STOP condition, press the button DELETE from Re-
mote Control to delete the current track.
SPECIFICATIONS
AC: 110-240V ~ 50Hz
FM: 87.5 - 108MHz
MW: 520 - 1620kHz
Design and specifications are subject to change without notice.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar HIF-1902HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar HIF-1902HP in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info