592294
5
Zoom out
Zoom in
Previous page
1/20
Next page
English English
This clock radio should not be exposed to direct sunlight, very high or low
temperature, moisture, vibration, or placed in a dusty environment.
Do not use abrasives, benzine, thinners, or other solvents to clean the
surfaces of the clock radio. To clean it, wipe with a mild non-abrasive
detergent solution on a clean soft cloth.
Never attempt to insert wires, pins, or other objects into the venlilation
holes or openings on the clock radio.
Note: When setting the Clock or Alarm times remember that this clock
radio has a 24 Hour clock mode.
AC POWER
For your own safety read following instructions carefully before attempting
to connect this clock radio to the mains.
This unit is designed to operate on a 230V~50Hz supply only. Connecting
it to other power sources may damage it.
Ensure that supply corresponds to the information on the rating label on
the bottom of the unit.
2. Set the FM/AUX Selector (11) to FM.
3. Turn the TUNING Knob (10) until the desired station is heard.
4. Adjust the VOLUME Control (12) to a comfortable listening level.
5. To turn off the radio, set the Function Selector (1) to the OFF position.
Note: For FM reception there is a built-in FM antenna wire at the rear of the
unit. Move the wire around to obtain the best reception.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button (7) will temporary
stop about 9 minutes then the alarm sounds again.
SLEEP FUNCTION
1. This function enables you to go to sleep listening to the Radio.
2. Set the FUNCTION Selector (1) to OFF or AUTO.
3. Press the SLEEP Button (2). The clock display will show 59 minutes.
The Radio turns on and will turn off automatically after 59 minutes.
4. To select a shorter time press the MINUTE Button (13) while holding
the SLEEP Button (2) until the desired sleep time is displayed.
5. To turn off the Radio at any time during the Sleep period, press the
SNOOZE/SLEEP OFF Button (7).
AUX-IN
1. Set the FM/AUX selector (11) to AUX socket and connect a 3,5mm
cable (not included) with the Audio source.
CARE AND MAINTENANCE
To prevent fire or shock hazard, do not allow this clock radio to be exposed
to rain or moisture.
5 6
SPECIFICATIONS
FM Band: 87.5 to 108 MHz
Power Supply: 230VAC, 50 Hz
Back-up Battery : 9V DC 006P (not included)
Specifications subject to change without prior notice.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2560 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info