471677

Roadstar CLR-2495P Manual

5
Zoom out
Zoom in
Previous page
1/27
Next page
English English
until the minute digits to be preset are displayed.
- Focus setting : To adjust the projection clock definition by turning
the FOCUS (23) until the project's time is clearly shown on the
ceiling or wall.
NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A
DARKENED ROOM.
MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
TO SET OR RESET THE ALARM TIME
1. Press and hold the ALARM SET/OFF button (5).
2. While holding the ALARM SET/OFF button (5) press the HOUR
SET button (9) and MINUTE SET button (10) to advance the time
until the desired alarm time is shown on the display.
TO SET THE ALARM TO WAKE TO RADIO
1. Set the alarm time as previously instructed. Select a radio station
and make sure the VOLUME is set as desired.
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When
the actual time on the clock matches the selected preset alarm
time, the unit automatically turns on for 1 hour and 59 minutes
and then shuts off. The time of the porjection does not trigger the
alarm.
56
Notes :
- To shut off the alarm, press the ALARM SET/OFF button (5) once
and alarm time will be reset for the next day. Slide the ON/OFF/
AUTO switch (1) to the OFF position to turn off alarm and not set
it for the next day.
- The radio can be temporarily turned off manually by pressing the
SNOOZE button (4); the radio will turn back on automatically 9
minutes later.
TO SET THE ALARM TO WAKE TO BUZZER
1. Set the alarm time as previously instructed. Slide the VOLUME /
BUZZER (11) knob to the BUZZER position; a click is heard and
the buzzer will now be activated.
2. Slide the ON/OFF/AUTO switch (1) to the AUTO position. When
the actual time matches the selected preset alarm time, the unit
automatically turns on for 1 hour and 59 minutes and then shuts off.
TO SHUT ALARM OFF
1. To shut off the alarm, press the ALARM SET/OFF button (5) once
and alarm time will be reset for the next day. Slide the ON/OFF/
AUTO switch (1) to the OFF position to turn off alarm and not set
it for the next day.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-2495P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-2495P in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info