592183

Roadstar CLR-1966-CR Manual

5
Zoom out
Zoom in
Previous page
1/20
Next page
English English
5 6
CARE AND MAINTENANCE
To prevent fire or shock hazard, do not allow this clock radio to be
exposed to rain or moisture.
This clock radio should not be exposed to direct sunlight, very high or
low temperature, moisture, vibration, or placed in a dusty environment.
Do not use abrasives, benzine, thinners, or other solvents to clean the
surfaces of the clock radio. To clean it, wipe with a mild non-abrasive
defergent solution on a clean soft cloth.
Never attempt to insert wires, pins, or other objects into the venlilation
holes or openings on the clock radio.
Note: When setting the Clock or Alarm times remember that this clock
radio has a 24 Hour clock mode.
DIMMER FUNCTION
Press the SNOOZE/DIMMER button (1) to adjust the display intensity.
AC POWER (EXTERNAL AC ADAPTER)
For your own safety read following instructions carefully before attempting
to connect this clock radio to the mains with external power transformer.
This unit is designed to operate on DC-4,5V only. Connecting it to other
power sources may damage it.
SPECIFICATIONS
FM Band: 87.5 to 108 MHz
AM Band: 522 to 1620 KHz
Power Supply: DC-4,5 V
Power Consumption: 3W
Design and specifications are subject to change without notice.
LISTENING TO THE RADIO
1. Press shortly the ON/OFF (2) button to switch the Radio ON
manually.
2. Press the AM/FM/AUX Button (9)
3. Press 2 seconds the TUN/MIN+ (3) or - TUN/HR (4) button to start
the Radio auto-tuning function (the unit will search automatically
the strongest stations).
4. Adjust the VOLUME Control (5/6) to a comfortable listening level.
5. To search manually a Radio station, when in RADIO mode press
the TUN- (3) or TUNE UP (4) button sequentially until the desired
frequency is displayed, press the Tune/Preset/Mem button (9) two
seconds until “P01” flash, then press TUN/TIME+ (3) or - (4) button
to store in the memory.
6. To listen the desired Radio stations, short press Tune/Preset/Mem
button (9) button to select the stored station.
7. To turn off the radio, press the Power ON/OFF button (2).
Note: For FM reception there is a built-in FM antenna wire at the rear
of the unit. Move the wire around to obtain the best reception.
SNOOZE FUNCTION
When the alarm sounds, pressing the SNOOZE Button (1) will temporary
stop about 8 minutes then the alarm sounds again.
SLEEP FUNCTION
1. This function enables you to go to sleep listening to the Radio.
2. Press the Power ON/OFF button (2) to switch ON the Radio.
3. Press the SLEEP Button (10) sequentially. The clock display will
show 10/20/30/45/60/90/120 minutes. The Radio turns on and will
turn off automatically after the selected sleep timer.
4. To turn off the Radio at any time during the Sleep period, press the
Power ON/OFF button (2) .
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-1966-CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-1966-CR in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info