592183
4
Zoom out
Zoom in
Previous page
1/20
Next page
English English
3 4
ora
the DC 4.5 V INPUT socket (13) located on the back of the unit.
2. Connect the AC/DC adaptor into a 230V ~ 50Hz AC power
outlet.
Notes:
Use only the supplied AC/DC adaptor. Using other types of
adaptor may damage the unit.
Make sure that the AC/DC adaptor matches with your household
voltage before connecting it into the wall outlet.
Do not touch the AC/DC adaptor with wet hands.
Battery Back-up Power Failure Protection
This radio has a battery back up circuit that will keep the correct
time and alarm settings in the event of a temporary power
interruption.
Install 2 x 1,5-volt battery (type UM3), not included, into the
battery compartment located on the bottom of the unit.
Note:We recommend an alkaline battery for longer usable life.
Change the battery every 9 to 12 months for best result and avoid
possible battery leakage.
If power is temporarily interrupted the display will blink and the
radio will not play. However, the battery back-up circuit will
continue to maintain the clock and alarm settings. When power is
restored the clock will display the correct time and alarm settings,
and no adjustment is necessary.
SETTING THE CORRECT TIME
NOTE: The Clocki can be set only if the unit is in Stand-By mode (radio
OFF).
1. Press 2 seconds the TIME CLOCK SET Button (11) until the display
blink.
2. Press the TUN/TIME+ (4) button to advance hour
3. Press the TUN/TIME+ (3) button to advance MINUTE until the
correct time is displayed.
4. Press the TIME SET Button (11) to complete the setting operation.
SETTING THE WAKE UP TIME
1. Set the alarm time by following this procedure:
2. Press 2 seconds the ALARM 1 / VOL- (6) or ALARM 2 / VOL+ (5)
Button.
5. Press the TUN/HR+ (4) button to advance HOUR until the correct
time is displayed.
7. Press the TUN/MIN+ (3) button to advance MINUTES until the
correct time is displayed.
8. Press shortly the ALARM 1 / VOL- (6) or ALARM 2 / VOL+ (5) to
finish.
3. Press again shortly the ALARM 1 / VOL- (6) or ALARM 2 / VOL+
(5) button to select BU (Buzzer) or Radio to the activate or
deactivate the alarm type (when ON, the indicator will light up on the
right or left side of the display).
10. To switch off the alarm press repeatedly ALARM 1 / VOL- (6) or
ALARM 2 / VOL+ (5) until tthe indication light disappear.
To review the alarm after set, press and hold ALARM 1 / VOL- (6) or
ALARM 2 / VOL+ (5) button for 2 seconds. The Alarm time will be
blinking on the display. After 5 seconds, it will go back to normal time
display.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CLR-1966-CR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CLR-1966-CR in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info