Manual Roadstar CDR-7000U (page 6 of 37) (English, German, French, Italian, Spanish)

592178

Zoom out

Zoom in

1/37

EnglishEnglish

9 10

5. Press the FOLD./10/M+ or FOLD./10/M- on unit or MEM/FOLD./10 UP/DOWN button on

remote to listen to the stored station directly.

CD/MP3 OPERATION

Discs for Playback

This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable

(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format

digital audio CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press the FUNCTION button on unit or remote control to select “CD” mode.

2. Press the OPEN/CLOSE button to open the CD door, “OPEN” will be shown on the

display.

3. Place an audio CD/MP3 DISC into the tray with the front side facing up.

4. Close the CD door.

The display will show a flashing “ — READING — “, then the total number of tracks would

be shown and the playback will start from track.

5. To remove the CD, press OPEN/CLOSE to open CD door, the display will show “OPEN “.

Hold the CD by its edges, and take it out carefully.

Note:

- Make sure the disc is stopped before opening the CD DOOR.

- To ensure good system performance; wait until the unit completely reads the disc before

proceeding.

- If no disc loaded into the tray, or the disc is unreadable, the display will show “NO DISC”.

PLAYING A DISC

1. The playback starts from track 1 automatically when reading the disc.

To pause playback, press button on unit or on remote. The current playing time will

flash on the display.

To resume playback, press button on unit or on remote again.

2. To stop playback, press MO/ST./ button on unit or on remote, the total number of

tracks.

SELECTING A DESIRED TRACK/PASSAGE

To select a desired track

Press the TUN+/ or TUN-/ button on unit or remote respectively in stop mode or

during playing until the desired track appears on the display. Press the button on unit or

on remote to start play.

To search for a particular passage during playback (track scanning at high speed)

Press and hold the TUN+/ or TUN-/ button on unit or on remote to scan the current

playing track at high speed until desired point (passage) appears, then release the button for

normal playback mode. Playback will start again from this point.

To select a song which track number exceeds 10

To select a song/track which number exceeds 10, Press the FOLD./10/M- or FOLD./10/M+

button on unit or -MEM/FOLD./10+ button on the remote control each time to skip backward

or forward 10 tracks, then press the TUN+/ or TUN-/ button on unit or on

remote to select desired track. For example: to select the 17th track from the 1st track,

press FOLD./10/M+ button on unit or press MEM/FOLD./10 UP(12) key on remote, and

then press the SKIP UP button on unit or on remote six times immediately.

To select a desired folder (for MP3 disc that contains more than one folder)

To select a desired folder during playback, press and hold the FOLD./10/M+ or FOLD./10/M-

button on unit or -MEM/FOLD./10+ button on the remote control to next /previous folder.

PROGRAMING TRACKS

Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /

MP3 99 tracks can be stored in the memory in any order.

In stop mode, press the PROG./P-MODE button on unit or press MEM/PROG./P-

MODE key on remote to enter program setting, the display will flash PROG and

P01 001.

Press the TUN+/ button on unit or on remote to select the first desired track to be

programmed. (example: track 2)

Press the PROG./P-MODE button on unit or press MEM/PROG./P-MODE key on

remote to enter. The display would flash PROG and P02 002.

Repeat steps 2 & 3 to store other desired tracks until all tracks programmed.

Press the button on unit or on remote to start playback from the first programmed

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CDR-7000U in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roadstar CDR-7000U Manual

Product: