Manual Roadstar CDR-7000U (page 5 of 37) (English, German, French, Italian, Spanish)

592178

Zoom out

Zoom in

1/37

EnglishEnglish

7 8

3. To the pre-set time, the desired wake up mode will turn on automatically.

Sleep To Music Timer

You can set the sleep timer to automatically turn off the unit during playback after a set

period of time (10, 20, 30… up to 90 minutes).

1)During operation, press the SLEEP button on unit or on remote control repeatedly to

select the desired sleep time from 90 minutes to 10 minutes, then stop pressing when the

desired sleep time come up, after about 5 seconds the sleep time will be automatically set

and the “SLEEP” indicator show on the display.

2)The RADIO or CD/MP3 or USB or AUX player will continue playing until the sleep timer

counts down to “00” and then turn off automatically.

Note: If you are falling asleep to CD/USB/AUX, the sound will stop when the disc ends,

even if a longer sleep time was selected.

Turning on the unit

Press the STANDBY button on unit or remote control, then press the FUNCTION button on unit

or remote control to choose FM / CD / USB / AUX model.

VOLUME ADJUSTING

Rotate the VOLUME button on unit or remote control to increase or decrease volume.

Press MUTE button on remote control to turn off the sound. Press again to turn on.

EQ FUNCTION

This unit has a built-in equalizer system, Press EQ button on unit or remote control while

playing to select different music style (sound tone): FLA, JAZZ, ROC, CLASS and POP.

ID3 System

When plays a MP3 file, press the SET/ID3 button on the unit or ID3 key on remote control, it

will show “ID3 ON”, if the MP3 file is”ID3" format, it will automatically search the information

of “TITLE NAME” “ARTIST NAME” and “ALBUM NAME” and show on the display. Press the

SET/ID3 button on the unit or ID3 key on remote control again to back to normal display.

HEADPHONE JACK

For private listening, insert a 3.5mm headphone (not included) into the HEADPHONE jack. The

SPEAKER output would be automatically cut off.

CAUTION: LISTENING AT A HIGH VOLUME OVER A LONG PERIOD IS NOT GOOD FOR

YOUR EARS.

RADIO OPERATION

TUNING RADIO STATIONS

1. Press the FUNCTION button on unit or remote control to select the desired wave band:

FM .

2. Tune to desired station by pressing the TUN+/ or TUN-/ , the display will show the

band frequency. Example: FM 97.10 MHz

3. Extend FM TELESCOPIC ANTENNA to its full length if you are listening to FM

broadcasting. Gently rock the unit back and forth to get the best reception when you are

listening to FM program, or place the unit in an open location.

Note: The radio function is initially set at STEREO mode, if the broadcasting program is too

noisy when you are listening to FM stereo station, press MO./ST./ button on unit or

press MO./ST./ key on remote to switch to MONO FM.

4. To turn off the radio, press the FUNCTION button to switch to other functions or press

STANDBY button to turn off the unit.

RADIO STATION MEMORY OPERATION

You may pre-store 20 (FM ) radio stations in memory for your preference controlled by

remote handset, so as you can listen to your desired station directly and quickly, no need to

tuning and search for again.

1. Press FUNCTION button to FM mode.

2. Press MEMORY button on unit or press MEM/PROG./P-MODE key on remote, “P01 “ will

flash on the display. Then press the “TUN+/ “or “ TUN-/ “ button to select the first

desired station.

3. Press the FOLD./10/M+ or FOLD./10/M- button unit or - MEM/FOLD./10 + on remote to

choose the desired sequence you want to store, then press MEMORY button on unit or

press -MEM/PROG./P-MODE+ key on remote again to enter.

4. Search another station, repeat steps (2) & (3) until all desired stations stored. Up to 20

stations can be programmed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CDR-7000U in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Roadstar CDR-7000U Manual

Product: