471848
7
Zoom out
Zoom in
Previous page
1/12
Next page
EnglishEnglish
109
5. 'AF/REG' function (ALTERNATIVE FREQUENCIES)
When pressed short, AF/REG switchig mode is selected.
When AF/REG switching mode is selected, the radio checks the signal strength of the
AF all the time. When pressed long, it is activated as regional mode ON/OFF.
– Regional mode ON:
AF switching or PI SEEK is implemented to the station which have all PI codes same as
current station. REG segment is turned on, in LCD display.
– Regional mode OFF
The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented.
6. 'TA' function (TRAFFIC ANNOUNCEMENT)
When pressed short, it is activated as TA mode on or off
When TA mode is on and traffic announcement is transmitted
– When the unit is it CD/MP3 mode, it will switch to radiomode temporarily.
– If the volume level was under the threshold point, it will be raised to the threshold point.
– When TP station is received, TP segment is turned on in LCD display.
When pressed long, TA LOCAL / TA DISTANCE mode is selected.
– TA LOCAL mode
When the field strength level linked is less than the threshold level, the radio does not
switch that station and user can hardly listen to any disturbances. “TA LO” is displayed a
few second.
– TA DISTANCE mode
TA switching is trying to implement the information of the current station.
“TA DX” is displayed a few seconds when this mode is selected.
7. 'PTY' function (PROGRAM TYPE)
PTY MUSIC ---- PTY SPEECH ---- PTY OFF
While selecting PTY type, its selection is impremented by preset buttons as described
in preset key. When PTY is selected, the radio starts to search corresponding PTY
information, and stops if the corresponding PTY information, is detected.
8. DISPLAY (DSP)
When this key is pressed, it is operated as the conversion of each display mode as
follow.
1) In case of receiving RDS station.
RADIO MODE
PS ---- CT ---- FREQ ---- PTY
CD/MP3 PLAYER MODE
CDP ---- CT ---- PS ---- FREQ ---- PTY
2) In case of receiving NON RDS station
RADIO MODE
CLOCK ---- FREQ ---- NO PTY
CD/MP3 PLAYER MODE
CDP ---- CT ----FREQ ---- NO PTY
9. MODE BUTTON (MODE)
By pressing this key, user can select.
RADIO mode or CD/MP3 PLAYER mode.
10.BAND/LOUDNESS (BND/LD)
Each band is toggled cyclically by pressing this key FM1---FM2---FM3---MW.
By pressing longer than 1 sec., LOUDNESS mode is selected.
LOUD segment is turned on when LOUD is activated, and Bass sound is increased.
11. AUTOMATIC OR MANUAL TUNING (FREQ UP :: OR FREQ DOWN 99 )
(A) RADIO MODE
When pressed short, these keys are operated as SEEK tuning mode.
When pressed longer than 1 sec., they are operated as manual tuning mode.
If the keys are not pressed for 3 seconds, they are returned to SEEK mode again.
(B) CD/MP3 PLAYER MODE
When pressed short, they are operated as TRACK UP or TRACK DOWN mode.
When pressed longer than 1 sec., they are operated as CUE or REVIEW mode.
12.AUTO SEEK SEARCH TUNING (AMS)
By pressing shortly, the radio searches for each preset station.
When field strength level is bigger than the threshold level of stop level, the radio is
holding at that preset number for 5 sec. with releasing mute, and than searches again.
By pressing longer than 1 sec, and then 6 strongest stations are preset to the corre-
sponding preset number.
When AS operation is finished, the radio executes the preset scan.
13.PRESET EQUALISER (EQ)
By pressing this button, can be changed the preset-equaliser modality as FLAT, CLAS-
SIC, POP, JAZZ, DSP OFF mode.
14.RESET BUTTON
This function is used for resetting the unit, for example when some function is blocked.
15.LCD DISPLAY
The Liquid Crystal Display will display the current state of the unit.
CD CONTROL LOCATION OF PARTS
11. TRACK/SEARCH BUTTON
FORWARD AND REVERSE TRACK SEARCH (or changing songs)
Press the SKIP button (99or::) during play to go to the desired track(song).
99....REVERSE ::....FORWARD
Press and hold the SKIP button (99or:: ) during play to scan the disc at high speed.
When the desired music section of the disc is found, release the button. Normal play will
resume.
When CD/MP3 play is finished, CD/MP3 mode automatically changes to radio mode.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Roadstar CD-804MPBT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Roadstar CD-804MPBT in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info