Manual Ritter Vertico 7 (page 17 of 103) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

713270

Zoom out

Zoom in

1/103

The hand blender has 3 speed

settings.

An overload protection function

with a safety switch-o mecha-

nism is automatically triggered in

the event of:

– Overheating

– A blade becoming jammed

– Continuous operation for more

than 4 minutes

BEFORE USING THE

APPLIANCE FOR THE

FIRST TIME

Preparation

• Remove the hand blender (1)

and all the accessories carefully

from the packaging.

• Remove all packaging com-

ponents and keep them in a safe

place.

• Clean the hand blender and

accessories before allowing them

to come into contact with any

food (see "CLEANING").

Setting up the hand blender

• Place the charging station (13)

on a at, non-slip surface close to

a mains socket.

Connect the power cord of the

plug-in power supply (15) to the

charging station.

• Connect the plug-in power

supply to the mains socket.

Hook the hand blender (1) into

the charging station by position-

ing it at an incline and then swiv-

elling it into an upright position.

• Leave the hand blender in the

charging station until the battery

is fully charged (see "CHARG-

ING THE BATTERY"). The hand

blender comes supplied with a

partially loaded battery.

USING THE HAND

BLENDER

Connecting/replacing an

attachment

CAUTION, risk of injury:

– Switch the blender (1) o

before connecting or remov-

ing attachments.

– Keep your ngers away from

the buttons to prevent the

appliance from switching on

accidentally.

– The blades on the attach-

ments are very sharp! Never

touch these blades with your

bare hands.

To connect one of the

attachments (9 – 12), hold the

attachment with a tea towel to

protect your hands and mount it

on the drive shaft (3b).

Make sure that the drive shaft

pin (3a) ts snugly into the slot on

the attachment (3c).

To remove the attachment,

hold it with a tea towel to protect

your hands and pull it carefully o

the drive shaft.

Using the hand blender

CAUTION, risk of injury:

Do not use your hands to

remove any pieces of food that

become jammed in the blades!

Use a blunt object (e.g. a small

wooden implement) to do this

instead.

• Place the food in the blender

cup (14) or another at-bottomed

container. Do not start using the

hand blender (1) until it is posi-

tioned inside the container.

Infos:

– Do not ll the blender cup

to the top when using the

blender. During blending, the

liquid in the cup will creep up

the sides and may splash out.

Unfold the illustrations at the front

and back of this manual.

Please read these instructions

thoroughly before you start to use

the appliance. Keep these oper-

ating instructions in a safe place

and ensure that they are included

with the appliance if passing it on

to a third party.

Alternatively, the current operat-

ing instructions are available at

www.ritterwerk.de.

INTENDED USE

The hand blender is used to

purée, chop, whisk and mix suit-

able household foods.

The hand blender is to be used

for domestic purposes only and

must not be used commercially.

If the hand blender is used in a

manner other than its intended

use or if it is incorrectly operated,

serious injuries may occur or the

blender may be damaged. All

warranty and liability claims will

be rendered null and void in this

case.

FUNCTIONS

With your battery-operated hand

blender, you can purée, chop,

whisk and mix both solid and

liquid foods.

The hand blender (1) is supplied

with a plastic blender cup (14)

and a universal cutter (9) as

standard. This standard attach-

ment can be used to chop and

purée most foods,

The following optional accesso-

ries are also available:

– Stainless steel blender cup

– Cutting knife (10): For chop-

ping meat and brous fruit and

vegetables

– Whipping disk (11): For lightly

beating and whipping foods

(e.g. cream)

– Stirring disk (12): For mixing

and blending thick, creamy

foods

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ritter Vertico 7 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ritter Vertico 7 Manual

Product: