Manual Ritter ET 10 (page 18 of 101) (English, German, Dutch, French, Italian, Polish, Spanish, Norwegian)

544785

Zoom out

Zoom in

1/101

Risk of burns

– The outer surfaces of the

toaster may become very

hot while the toaster is in

operation. Always allow the

toaster to cool down a little

before touching it (e.g. prior to

cleaning).

– The bread and roll rack may

become very hot. Always use

the slide bar to raise or col-

lapse the bread and roll rack.

– Freshly toasted or warmed-up

bread can be very hot. You

should therefore only remove

the bread from the toaster

when it has cooled down

slightly.

Risk of re

Bread can burn. It is therefore

not inconceivable that bread

may catch re while the toaster

is operating. Please observe the

following re safety instructions:

– Do not operate the toaster

near or below ammable

material such as curtains.

– Never cover the toasting slot

while the toaster is in use.

– Never use this appliance to

toast dried breads such as

crisp bread, melba toast etc.

– Never use the toaster to toast

bread covered in any kind of

coating.

– Never place bread rolls directly

over the toasting slot. Always

place bread rolls on the bread

and roll rack provided.

– Allow the toaster at least

30 seconds to cool down after

each use.

– Empty the crumb tray after

each use.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ritter ET 10 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Norwegian as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ritter ET 10 Manual

Product: