745568

Rika Room Temperature Sensor Manual

13
Zoom out
Zoom in
Previous page
1/20
Next page
Heating programming
For operation in AUTO mode, you can set individual heating times. You can perform the setup
under the menu item TIME.
Weekly heating times
You can save two heating times which are the same for every day of the week. Heating times
are already set up as factory default, however these can be changed as desired by pressing
the (+)/(-) button. Each time you press the button, the time changes in increments of 10 minutes.
Tip
There must be at least one hour between the times for switching on and switching off, and
between the end of the first heating time and the start of the second! The control system
does not permit non-compliant input.
Scroll
button
Change
button
Display Description
TIME Display to access the time programming
I/O TIME SET
Display to access the time programming for the
current date and time
MENU TIME AUTO Display to access the heating programming.
I/O DAY
- WEEK Return to DAY by pressing the plus button
I/O ON1 6:00 Display of the first start time
+ / - ON1 06:10 Chang of the time in 10 minute increments
MENU OFF1 12:00 Display - End of the first heating time
MENU ON2 14:00 Display of the second start time
MENU OFF2 18:00 Display - End of the second heating time
MENU WEEK Display to access the weekly heating program
MENU TIME AUTO
By repeatedly pressing the MENU button, you
get back to the standard display.
If you use the plus buttons to set the ON time too close to the OFF time, the latter is automatically
extended so that the interval of one hour is ensured.
If you use the minus buttons to set the OFF time to the same time as the ON time, the heating
time is ignored by the control system. There will then be only one heating time per day.
If you use the plus buttons to set the OFF time for the first heating time too close to the ON
time for the second heating time, the latter is automatically extended so that the interval of
one hour is ensured.
The programming of the weekly heating program is automatically imported into the daily
heating program.
|13
EN
12
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Room Temperature Sensor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Room Temperature Sensor in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info