745568

Rika Room Temperature Sensor Manual

19
Zoom out
Zoom in
Previous page
1/20
Next page
Errors and warnings for button display
The LED display of the wireless receiver in the stove displays various errors.
If the LED display on the receiver is flashing in alternating green and red, there are two
transmitters with the same DIP switch settings within receiving range. Select another matching
switch setting for the sensor and receiver. The LED display will switch to normal mode and
show a continuous green.
If the LED display of the wireless receiver is flashing continuously green in a new installation,
this means it cannot connect to the wireless room sensor. Check the battery in the wireless
room sensor, and increase the transmitter power as described in the section on INSTALLATION.
Note
If the stove always heats to 25 °C, check DIP switch 4 of the wireless receiver.
For controlled heating, switch 4 must be in the OFF position.
Warnings in the display:
If the connection to the room sensor is interrupted, after approx. 10 minutes a warning is shown
on the display in moving text: “ROOM SENSOR SIGNAL LOST”. The stove switches to standby.
When the connection with the room sensor is restored, the warning automatically disappears
and the mode previously set continues.
While the “ROOM SENSOR SIGNAL LOST” warning is displayed, the room sensor can be
switched off by pressing the I/O button. The stove switches to “HEAT” mode, and the further
procedure for operation in manual mode is described in your stove manual.
Action to be taken when errors are displayed:
Q Check the plug connection between the cable and the circuit board.
For the wireless room sensor, additionally:
Q Check the battery voltage of your wireless room sensor. (The LED on the wireless receiver
in the stove is lit red.)
Q Check for factors interfering with the wireless signal. Increase the transmitter power by
setting DIP switch 4 in the wireless room sensor to ON - see Installation.
|19
EN
18
… 19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Room Temperature Sensor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Room Temperature Sensor in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info