Manual Rika Roco Multiair (page 21 of 24) (English)

745525

Zoom out

Zoom in

1/24

|21

11. INSTRUCTIONS FOR COMMISSIONING PROTOCOL

FOR PELLET AND COMBI STOVES

The commissioning protocol is to be treated as a documents and serves as

the basis for the warranty and guarantee terms. It is to be completed entirely,

in particular the stove data and addresses, the work to be performed is to be

ticked off after completion. The signatories conﬁrm with their signatures that all

the items on the list have been concluded properly.

Note

Please return 1 completed protocol for putting into service to

RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563 Micheldorf, Austria.

Electrical periphery

It is important that the connection socket in the electrical periphery is earthed.

The operability of any room thermostat present must be checked. The execution

of commands is to be established by phoning in the case of a GSM modem.

Exhaust gas system

The exhaust line, stove and combustion air inlet are part of the combustion

system as a whole; therefore the correct execution must also be checked.

The plug connections should be tight in general since the system works with

excess pressure. The exhaust tube has a diameter of 100mm for pellet stove,

and of 150 mm for the combi stove, which is sufﬁcient for short distances. In

the case of several changes in direction, the resistance of the exhaust system

can increase with the ﬂue to such an extent that the combustion quality suffers

and/or noise arises from the greater ﬂow speed. Correct determination of the

chimney draught can only be performed at nominal thermal output and serves

to evaluate the chimney. If the draught is more than 15 Pa, then a draught

limiter should be installed.

Stove functions

These are the basic stove functions that are to be checked and ticked off. The

stove is ready for operation if these functions are ensured.

Operator instruction

This is one of the most important points in the putting into operation. It is very

important that the operator understands the stove properly and is prepared to

assume responsibility for the basic tasks required for operational safety.

In particular the connection between special features of a biomass heating

system and his obligations as well as the warranty and guarantee terms must

be explained. e.g. non-tested pellets and screw blockers, lack of cleaning or

maintenance and stove malfunctions. Thorough instruction can prevent many

complaints.

Stove functions

Explanation of the processes in the stove during ignition, normal operation,

cleaning phase etc.

Control

Explain operator’s possibilities to intervene, empty pellet container, room

thermostat, GSM modem, functions and settings, program times if necessary.

Operating instructions: Handover and reference to the content to the following

points, is a document.

Warranty terms

Difference between warranty (statutory) and guarantee (voluntary), terms of

guarantee, determination of wearing parts, reference to pellet quality to be

used and the consequences of poor quality.

Cleaning instructions

Ash and dust occurs with a biomass heating unit. The ﬁre trough is to be

cleaned regularly with regular heating operation (in the case of pellet operation,

the drilled air holes in particular must be free of residues). The ash drawer is

to be emptied regularly. The ﬂue gas pipes are to be cleaned once or twice in

the heating season depending on stove type; by a specialist company is best.

Maintenance

Note

We recommend at least once a year to have all maintenance carried out by

your RIKA dealer.

Combustion

All doors must close tightly to prevent intake of false air.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Rika Roco Multiair in the language / languages: English as an attachment in your email.

The manual is 11,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Roco Multiair

Rika Roco Multiair User Manual - German - 24 pages

Rika Roco Multiair User Manual - Dutch - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Rika Roco Multiair Manual

Product: