744718
3
Zoom out
Zoom in
Previous page
1/12
Next page
1. FIRST STEPS
The Rikatronic4 control is regulating the combustion of your wood automatically.
By controlling the air supply the stove is operated in the optimum temperature
range, the emissions are reduced to a minimum. In addition, the automatic
control system ensures optimum efficiency. The display always provides
information that will make the operation of the stove comfortable for you.
Plug in the power cord and press the power switch at the rear of the stove. On
the display the stove type and software version will be displayed for 2 seconds.
During the control is checking the components of the stove, WAIT will be shown
on the display. This may take up to 4 minutes. After successful verification, the
display changes to the set time.
The stove can now be heated.
The user board of Rikatronic4 consists of the display and 4 Buttons.
Function Plus
Menu Minus
Tip
The power saving function will switch off the backlight of the display panel
completely. The next key touch will only activate the backlight, only after that
the buttons get back their original function!
Note
For devices with Rikatronic4 (electronic air control) the adjustable damper flap
of the flue pipe must always be open during heating! Danger of Deflagration!
Note
Certain functions are only possible with cold stoves (automatic ignition, fully
closing the air flaps ...). The display HOT with red backlighting indicates an
unsupported function in current operating mode.
Note
Certain functions are only available if the combustion chamber door is closed
(automatic ignition, fully closing of the air flaps ...). The display DOOR with red
backlighting indicates the open door.
RIKA firelighter
Always ignite the RIKA firelighter on the red tip. One block consists out of 8 ribs
which can be divided to the desired size. The amount of RIKA firelighters also
depends on the size and humidity of your firewood. Ideally, one rib is enough
to light up the fire.
Tip
You can order the lighter with the number E15718 at your RIKA dealer.
Note
A safe lighting is guaranteed only with the original RIKA Firelighters. Damage
caused by improper handling or by using other than recommended lighters
are excluded from the guarantee.
|3
EN
2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Rikatronic 4 V1.02 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Rikatronic 4 V1.02 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Rikatronic 4 V1.02

Rika Rikatronic 4 V1.02 User Manual - German - 12 pages

Rika Rikatronic 4 V1.02 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info