744703
30
Zoom out
Zoom in
Previous page
1/36
Next page
30
Clean flue gas passes
Remove the top panels and the convection fins (see ASSEMBLY / DISASSEMBLY
SIDE PANELS)
Open the wing nut and pull back the flame temperature sensor holder.
The flame temperature sensor can be pulled out of the cast cover.
After the flame temperature sensor has been removed, you can lift off the cast
iron cover.
Clean the left and right flue gas passes on the combustion chamber side with
the soot brush.
Vacuum free the exposed interior and the side passages of impurities.
Install the removed parts in reverse order again.
Clean flue gas collecting channel
Open the firebox door.
Remove the lower front panel.
Remove the cover plate by opening the hexagon screws.
Vacuum the combustion residues from the flue gas collection channel.
Install the removed parts in reverse order.
Note
If the seals of the cleaning cover are not properly sealed, it is possible that
the heater gets “wrong air”, causing incomplete combustion in the grate and
then an accumulation of pellets.
#19
#10
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rika Pico at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rika Pico in the language / languages: English as an attachment in your email.

The manual is 20,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Rika Pico

Rika Pico Additional guide - English - 12 pages

Rika Pico User Manual - German - 36 pages

Rika Pico Additional guide - German, Dutch - 12 pages

Rika Pico User Manual - Dutch - 36 pages

Rika Pico Additional guide - French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info