1. Remove the cover (Fig. 6, 60) from your
st
ove.
2. Now push the side panel sections (Fig. 6,
62) fr
om above into the guide slots.
3. Position the cover on the stove.
CHANGING FLUE PIPE CONNECTION
ABOVE TO CONNECTION AT REAR
(Fig. 8)
1. Remove the cover insert (Fig.6, 60) from
your stove.
2. Pull the rear panel (Fig.6, 63) upwards out
of the side guides. Cut out the pr
e-cut
cir
cular section in the r
ear panel using a
ha
cksaw
3. Swap the flue gas connector (Fig.7, 71) (3x
cross slot screws) and cooking cov
er
(Fig. 7
, 72) (3x cross slot screws) with each
other.
4. Attach the insert for connection to
the
r
ear (Fig. 7, 70) as shown in Fig. 7.
5. Now refit the rear panel and position the
cover on your stove.
SIDE PANELLING - HEAT RETENTION
CHAMBER
6. FITTING OPTIONS
Your stove has been designed by our deve-
lopment team with minimal maintenance in
mind and for a very long service life.
Certain cleaning activities and checking the
seals are however necessary from time to
time. The time periods between the ins-
pection intervals are above all dependent
on the fire wood quality used and the fre-
quency of use.
ONCE MORE
OOnnllyy uussee wwoooodd tthhaatt hhaass bbeeeenn ssttoorreedd
pprrooppeerrllyy aanndd iiss ddrryy aanndd uunnttrreeaatteedd.. FFeeeedd tthhee
ccoorrrreecctt qquuaannttiittyy ooff wwoooodd iinnttoo tthhee ssttoovvee..
The s
tove finish is highly refractory and
must only be cleaned using a cloth (damp if
necessary). Only use original paint for
touch up work, this is available from your
specialist dealer as an accessory.
CONVECTION AIR OPENINGS
Regularly clean dust deposit from the con-
vection air openings. The stove should be
cleaned thoroughly before the start of the
new heating season, in order to prevent
strong odours.
FINISH - CONDITION AND CLEANING
The door glass can be cleaned using a glass
cleaner designed for the purpose. The clea-
ner can be obtained from your specialist
fire dealer. Should the glass become heavily
sooted the possible cause could be damp
wood.
GENERAL MAINTENANCE
7. MAINTENANCE AND CLEANING
Maintenance and cleaning work must only be
carried out when the stove has completely
cooled down.
Should the fuel be poor, the number of neces-
sary maintenance activities can more than
double.
13
ENGLISH
CLEANING THE FLUE GAS CHANNELS
(1 x annually)
RReemmoovvee tthhee fflluuee ppiippeess
Brush off and vacuum any soot and dust
deposits in the stove and in the flue pipes.
Check the seals on the stove door and the
ash drawer before the beginning and end of
the heating period. Should they be dama-
ged or excessively worn, then please order
the relevant replacement.
Only intact seals guarantee the perfect function
of your stove. Loose seals can be secured with
Thormohit sealant adhesive.
