4. INSTALLING THE STOVE
CHANGING THE FLUE PLATE
Fig. 5
If the flue plate or flue direction in your
stove needs to be changed, lift the flue
plate carefully to the side and remove the
side firebrick.
Now you can turn the flue plate diagonally
and rotate it through the grate opening.
If you do not use our original flue pipes for
the flue connection, then we recommend 2
mm steel sheet pipes. The connecting piece
must not project into the chimney shaft!
Seal the gap between the flue pipe and wall
lining using a ceramic seal.
CONNECTING THE CHIMNEY
Proceed as follows when fitting a connec-
tion to a bricked chimney:
1. Measur
e and draw in the chimney
connection (taking any floor plate thickness
into accoun
t) as per the dimensions in situ
2. Chisel out (drill) the holes in the w
all
3. Bric
k in wall lining
4. A
fter the mortar has hardened, and after
plastering and painting, position the floor
plate including the floor protection (car-
ton).
5. The s
tove can now be lifted onto the
floor plate carefully.
Before first commissioning or after changing
the location of the stove, cleaning and service
work, ensure that the flue plates (Fig. 5, 49),
and the wood catcher (Fig.3, 9) are correctly
positioned. When using a flue pipe with
throttle valve, the throttle valve must be open.
Care must be taken with this stove that the
flue draught reaches at least the prescribed
value (> 0.8 mbar). Should problems arise
here, please contact your master chimney
sweep.
First seal the wall lining using mineral wool
insulation. Afterwards plaster using heat
resistant cement mortar or equivalent.
The stove must not be pushed along an
unprotected floor.
Strong corrugated cardboard, carton, or an old
carpet are excellently suited as an installation
aid and an underlay. The stove can also be
pushed on this underlay.
The installation must comply with the respective
safety and construction regulations. Please
contact your master chimney sweep in this
respect – he will be happy to give you information.
If you use a system chimney (e.g. glazed
fireclay), please follow the manufacturer’s
connection instructions precisely.
11
ENGLISH
