639648
154
Zoom out
Zoom in
Previous page
1/178
Next page
5-24
Message Cause Solution
The media jam occurs. Remove the media and reset it.
The media width has not been
detected correctly.
Check the media set position. ( P.2-
8)
Clean the media sensor. ( P.4-4)
A HDC position counter error
occurred.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Y-origin could not be detected.
Abnormal linear scale.
The media is set outside the proper
area.
Check the media set position. ( P.2-
8)
The temperature in the media
heater won’t rise.
Check whether the heater power
switch near the main power switch is
ON.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
The liquid level sensor abnormality
of the damper has been detected.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Though a certain amount was con-
sumed, there is no change in the
damper sensor High.
Perform “DAMPER ( P.5-9) ” of the
maintenance.
Even if you performed this, when the
message is displayed, contact your
local distributor to call for service.
Though a certain amount was con-
sumed, there is no change in the
damper sensor Low.
Overflow from the damper has been
detected.
Ink could not be supplied to the
damper.
Perform “DAMPER ( P.5-9) ” of the
maintenance. Also check the remain-
ing amount of ink in the Eco-cartridge.
Even if you performed this, when the
message is displayed, contact your
local distributor to call for service.
ERROR 5 0 5
MED I A J AM
ERROR 5 0 c
MED I A WI DTH SENSOR
ERROR 5 0 9
HDC POSCNT
ERROR 5 0 a
YORIGIN
ERROR 5 0 f
L-SCALE BLACK
ERROR 5 1 6
MED I A SE T POS I T I ON R
ERROR 5 1 6
MED I A SE T POS I T I ON L
! PRE HEATER BRK
! PRT HEATER BRK
!POST HEATER BRK
ERROR 6 1 7
DAMPER Sens : 12345678
ERROR 6 1 8
DAMPER/HIGH: 12345678
ERROR 6 1 9
DAMPER/ LOW : 12345678
ERROR 6 1 a
INKOver f l ow: 12345678
ERROR 6 1 b
SUPPLY INK : 12345678
154


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info