639648
153
Zoom out
Zoom in
Previous page
1/178
Next page
Warning / Error Messages
5-23
1
1
1
1
5
Troubleshooting
Message Cause Solution
An error occurred in the main PCB
3.3VB power supply.
Turn off the power to the machine and
turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
COM driver becomes the high tem-
perature.
New Print Head was recognized.
The main PCB Q6 is disabled (short
mode).
An error is detected on the wave-
form printed on.
An error occurred in the main PCB
V_CORE power supply.
An error occurred in the main PCB
1.5VB power supply.
An error occurred in the main PCB
12V power supply.
The machine received some data
other than command data.
Securely connect the interface cable
in position.
Use an interface cable conforming to
the specifications.
Any parameter outside the range of
acceptable numeric values was
received.
A maintenance command error
occurred.
USB device initialization failure.
Turn off the main power to the
machine and turn it on after a while.
If the same error message appears
again, contact your local distributor to
call for service.
Occurrence of a time out error on a
USB device.
An excessive load was applied to
the X motor.
An excessive load was applied to
the Y motor.
An error due to an excessive cur-
rent of the X motor was detected.
An error due to an excessive cur-
rent of the Y motor was detected.
ERROR 1 6 e
Ma i n PCB V3R3B
ERROR1 5 f
HEAD DR I VE HOT
ERROR 1 7 1
NEW HEAD CONNECT
ERROR 1 7 2
Ma i n PCB Q6 Ch e c k K
ERROR 1 8 6
HDC OVERF LOW
ERROR 1 8 6
HDC UNDERF LOW
ERROR 1 8 7
HDC SLEW RATE
ERROR 1 8 8
HDC MEMORY
ERROR 1 8 a
Ma i n PCB V_CORE
ERROR 1 8 b
Ma i n PCB V1R5B
ERROR 1 8 c
Ma i n PCB V1 2
ERROR 2 0 1
COMMAND
ERROR 2 0 2
PARAMETER
ERROR 2 0 3
Men t Command
ERROR 3 0 4
USB I N I T ERR
ERROR 3 0 5
USB T I ME OUT
ERROR 4 0 1
MOT OR X
ERROR 4 0 2
MOT OR Y
ERROR 4 0 3
X CURRENT
ERROR 4 0 4
Y CURRENT
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info