639648
102
Zoom out
Zoom in
Previous page
1/178
Next page
4-6
4
Press the key.
The carriage moves to the maintenance position.
If the carriage is not covered by the ink cap for a long period
of time, the nozzle face of the head may get dry and clogged,
resulting in white lines being left in the printed image.
• The buzzer sounds periodically while the carriage is out of the
capping station. The buzzer sounds at shorter interval when
the print heater temperature is high.
5
Open the right maintenance cover cover then
remove the wiper.
Pull out the wiper by holding the protrusions at its both ends.
6
Put the wiper that you used for one day into a provided case or solvent-resistance-
covered-container (glass, earthenware, etc.) and pour Cleaning Fluid.
Time to immerse the wiper shall be for 1 to 24 hours.
7
Take out the wiper and remove ink blot etc. with a
Kimwipe®.
Wipe off well so that any lint etc. do not remain on the top
edge of the wiper film.
If you leave the wiper immersed in Cleaning Fluid too long, the wiper may be deformed.
Dispose the Cleaning Fluid for soaking the wiper if it gets dirty. (As a guide, replace it in a
week). Regarding disposal of unused Cleaning Fluid, please ask Industrial waste disposer
and pursuant to the regulations of your district.
For case for immersing the wiper, please use provided case or solvent-resistance-covered-
container. In case that you want to immerse the wiper by using your resin case, please
make sure to test whether there are no problems such as case deformation before you try.
Carriage
Projection
At the start of immersion
At the end of immersion
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info