639648
101
Zoom out
Zoom in
Previous page
1/178
Next page
4-5
1
1
1
4
Routine Maintenance
Maintaining the Capping Station
Maintain the ink cap, wiper, etc. located in the capping station. (SATION MAINT.)
The ink cap and wiper function as follows.
Wiper : It wipes off ink sticking to the head nozzles.
Ink cap : It prevents the head nozzles from clogging due to dryness.
As the machine is used repeatedly, the wiper and ink cap gradually become dirty with ink, dust, etc.
If nozzle missing cannot be corrected even after head cleaning ( P.2-22) has been performed, Clean this
machine using the cleaning supplies that are recommended by this company.
Cleaning the Wiper and Cap
Ink, dust, or paper waste is pooled on the wiper. To keep stable printing quality, wash the wiper and cap at the
end of the day.
1
Press the key in LOCAL.
2
Press the key.
3
Press to select [STATION MAINT.].
To keep the nozzle status normal, perform wiper cleaning
frequently.
The right message is displayed periodically in LOCAL. When
you press the key, it moves to cleaning function.
Tools required for Maintenance
Maintenance kit Gloves
Clean stick Goggles
Be sure to wear the supplied goggles and gloves when maintaining the capping
station.Otherwise, you may get ink in your eyes.
Do not move the carriage out of the capping station by hand.When it is desirable to move the
carriage, press the key to execute the carriage-out. ( P.4-5Steps 1 to 2)
Further, in the cases as explained below, replace the wiper with the new one.( P.4-28)
Even if you clean the wiper enough, nozzle clogging etc. occurs frequently
When the wiper is deformed
When the stuck ink can not be wiped off
When the warning for wiper replacement is indicated
When cleaning the wiper, be careful that lint from the clean stick or kimwipe® does not get left on the
wiper.Remaining lint may cause image quality to deteriorate.
Clean the wiper completely until the stained ink on the top
edge of the wiper film is washed away after soaking the wiper
in the Cleaning Fluid for 1-24 hours. It is recommended to
prepare two or more wipers and use them alternately.
If cleaning of the wiper is not enough, it may cause nozzle
clogging.
Do not wash the wiper with other than the Kimwipe®.
Otherwise, lint may remain on the wiper.
WI PER CLEAN I NG
[MNT]
MAINT.
Reference for cleaning
Top edge of the film
CARR I AGE OUT
[ENT]
MAINT.
MOV E POS I T I ON
:STATION MAINT.
MOV E POS I T I ON
:STATION MAINT.
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Pro L4130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Pro L4130 in the language / languages: English as an attachment in your email.

The manual is 28,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Pro L4130

Ricoh Pro L4130 User Manual - German - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info