639647
25
Zoom out
Zoom in
Previous page
1/30
Next page
Frequently Asked Questions
23
4.2 What should I do when I cannot get my la-
ment to go through the lament guiding tube?
If you cannot get the lament to go through the
guiding tube remove the push in-coupling at the
top of the drive unit push the lament through
and then screw back the push in coupling and
push the lament all the way to the printhead.
4.3 What can I do if my lament does not come
out of the extruder?
The rst thing to check is if the drive wheel is
slipping and not pushing the lament through.
If the pressure on the lament is ok, remove the
guiding tube from the print head and heat up
the extruder. Then use a 1.5 mm thin steel tool
to push through the extruder tube to remove
any remaining lament out of the extruder.
Then reload the lament and extrude.
4.4 My print surface is very rough, how can I
solve this?
Are you using the right settings for your mate-
rial (are you printing with PLA with PLA set-
tings?) And are you using the latest settings
for your material? The latest settings for your
material can be found here: creatrhs.lpfrg.com/
. In section 3.4 you can read the instructions on
how to import these into the Simplify3d slicing
software.
4.5 Where do I go with my other questions?
As a Leapfrog 3D printer owner, you are now ofcially part of The Ecosystem: the place where all
Leapfrog 3D printer users gather to help each other and to interact with the Leapfrog 3D Printers
support team. Here are a few valuable tips on what you are able to nd there.
The Ecosystem can be entered through creatrhs.lpfrg.com/. The Ecosystem is constantly growing
in content and users. Here are some of the most important things you can nd there:
Installation and support videos, as well as the latest version of the manual for all the printers
The latest software settings for all materials (posted under “knowledgebase”)
Solutions for the most common issues
Our forum, where users help each other and where you can post your amazing prints (every
once in a while, we will highlight a few in our newsletter and on our website, we will always
mention you of course!)
The Leapfrog 3D Printers support team: if you have any questions you can just submit a ticket
online (“request help”) and we will get you on your way.
Push-in coupling
1.5mm steel tool in nozzle
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ricoh Creatr HS - Leapfrog at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ricoh Creatr HS - Leapfrog in the language / languages: English as an attachment in your email.

The manual is 9,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ricoh Creatr HS - Leapfrog

Ricoh Creatr HS - Leapfrog User Manual - German - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - Dutch - 30 pages

Ricoh Creatr HS - Leapfrog User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info