9
Installing Revo with an FM
aerial input
If your existing in-car audio system does
not offer an auxiliary input on RCA phono
connectors, use the modulator supplied
with Revo to add the digital audio from
Revo as a modulated signal on the FM
aerial input. You can then select the audio
from Revo by tuning the vehicle’s radio to
87.7 MHz.
n Connect the cable from the existing FM
aerial to the flying aerial input lead on
the modulator.
n Connect the aerial output from the
modulator to the aerial input of your in-
car FM tuner.
n Connect the two RCA phono outputs
from the Revo car cradle to the RCA
phono inputs on the modulator.
n Connect the two power connectors to
the vehicle power supply.
n Tune your car stereo to 87.7MHz
to listen to Revo. Other frequencies
are available, and are written on the
modulator.
