8
Installing Revo
There are two options for connecting Revo to an existing in-car audio system depending
on the features it offers. This section will help you decide which option to use. Skip this
section if Revo has already been installed for you.
Connecting the Revowave
antenna
n Attach the antenna to the
windscreen alongside the
passenger A-pillar.
n Connect the cable to the
antenna connector on the
Revo car cradle.
Leave at least 5cm between the antenna
and A-pillar.
Note: Heated or athermic heat-reflecting
windscreens may prevent the antenna
from receiving an adequate signal. In
this case attach the antenna to the rear
window, or use an external aerial.
Installing Revo with a direct
audio input
If your existing in-car audio system provides
an auxiliary input, using RCA phono
connectors, you can connect the audio
output from Revo directly to this, and you
do not need to use the modulator supplied
with Revo.
n Connect the two RCA phono outputs
from the Revo car cradle to the RCA
phono inputs on your in-car system.
n Connect the two power connectors to
the vehicle power supply.