Manual Respekta KGE144 (page 17 of 26) (English, German)

793543

Zoom out

Zoom in

1/26

English User’s manual FRIDGE FREEZERS

fi210217

User’s manual

The user manual apply to several models, for this reason

there may be some differences in the details given,

according to the type of the appliance.

1 Protecting the environment / advice for disposal

Packing

The packing serves to protect the appliance during

transportation and recyclable materials have been used for

packaging.

Corrugated board/cardboard (mainly from waste paper)

 shaped parts in PS (foamed CFC-free polystyrene)

 foils and bags in PE (polyethylene)

 strapping tapes in PP (polypropylene)

 Please hand over all packaging to the nearest official

collection point, so that all the different materials can be re-

used or recycled as far as possible and any illegal

depositing of such materials is thus avoided.

2 Deciding where to locate your appliance

In order to avoid any damage or injury to persons or things,

the appliance should be unpacked by two people and placed

in the chosen location

Before positioning it, check that your new appliance has

no visible outer damage.

On no account should you start up your appliance if it is

damaged.

Check the appliance carefully for:

 Damage to the packaging, which might indicate that the

appliance has been mishandled during transportation.

 Damage to the outer casing

 Any visible damage to the cable / plug

If in any doubt let, the customer service department check

the appliance.

It must at all costs be avoided, that any environmentally

damaging refrigerant leaks out by starting up the appliance.

3 Installing your appliance

a) Unpack the fridge / freezer.

b) In order not to unnecessarily waste raw materials, the

handles (requiring smaller packaging) have not been

mounted onto the separate parts of the appliance.

Mount the door handles and at the same time any other

enclosed parts according to the relevant instructions

enclosed separately.

c) Remove any objects from inside the appliance.

d) Carefully remove all film and adhesive tape

from the casing

from the door

e) Remove any polystyrene pieces from around the

compressor (if present).

f) Remove all documents and accessories from inside the

appliance.

g) Clean the inside of the appliance with lukewarm water

and vinegar and dry it thoroughly with a soft cloth.

Do not use washing liquids, sharp or abrasive

household products or any other cleaning agents

containing soda.

Make sure that the pipes for the circulation of the

refrigerant are not damaged in any way during installation

of the appliance.

The appliance must only be used for the purpose for

which it is intended.

The appliance must be placed on a firm, level surface.

This is the only way to ensure that the refrigerant can

circulate freely and thus ensure that your appliance will

work efficiently.

If possible, place your appliance in a cool, well-aired,

dry room.

Do not place your appliance in direct sunlight, nor in a

room at high temperature.

Do not place your appliance in the vicinity of any sources

of direct heat such as heating, ovens, cooking stove etc.

(This would mean the compressor would have to work

harder and as a result the power consumption would be

considerably higher).

If installation near a direct heat source cannot be avoided,

we recommend fitting a suitable insulation plate between the

appliance and the heat source (do not use asbestos), or at

least the following minimum distances must be observed:

 from a gas or electric cooker 5 cm

 from a radiator or oven etc. 30 cm

 from another refrigerating appliance 3 cm

Do not place any appliances, such as

microwaves, toasters etc. that give off heat on the

appliance.

Never obstruct the ventilation grille.

Always pull out the plug itself and never pull the cable

when cutting the appliance off from the mains supply.

Leave the appliance standing in its final position for

at least 2 – 4 hours before switching it on, so that the

circulation of the refrigerant stabilises and no

operating problems occur.

Before connecting up the appliance, make sure that it

is absolutely dry inside - especially in the corners.

Depending on its composition, the refrigerant can be

easily inflammable. The refrigerant circuit has been

hermetically sealed and has been tested many times for

possible leaks.

Any inexpert interference might well create a fire hazard.

Make sure nothing mechanically effects the circulation of

the refrigerant, nor, in particular, the accessible parts

around the compressor.

Only expert professional personnel should intervene

on the refrigerating system.

Any refrigerant spilling out can injure your eyes.

In the event of eye contact with the refrigerant, wash

your eyes instantly under plenty of running water and

call/consult a doctor (an eye specialist) immediately.

Climate category:

The appliance, according to its climate category, is meant

for use at certain room temperatures.

These temperatures should not be exceeded! The climate

category for your particular appliance is marked on the

rating plate. The categories are:

name of climate

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Respekta KGE144 in the language / languages: English, German as an attachment in your email.

The manual is 2.07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Respekta KGE144 Manual

Product: