613882
2
Zoom out
Zoom in
Previous page
1/8
Next page
2 — Renusol ConSole · EN · 04/2011
INSERTION
Product Information
The ConSole assembly system is the ideal solution for installing PV modules
on flat roofs with pitch of up to 5° without roof penetration. Most commercially
available framed standard PV modules fit on the ConSole.
The ConSole is weighed down with ballast (gravel, paving slabs, etc.) in order to
resist the wind loads. The necessary weight of the ballast depends on the height
of the building, its location and condition of the ground and the wind and snow
loads.
Reference values for the necessary ballast are contained in "Preparing the
assembly – point 2." in the table on page 5 above.
The ConSole is made from 100% recycled chlorine-free polyethylene (HDPE).
The material of the ConSole satisfies the fire prevention measures of DIN 4102
class B2. The energy amortization time of the ConSole is shorter than one year.
A ConSole weighs 5 −7.2 kg depending on the type and can be stacked with up
to 40 ConSoles per pallet. The circular assembly edge will facilitate a fast
installation. Generously sized ventilation channels ensure efficient air circulation.
The boreholes on the ground of the ConSole are conducive for drainage.
We wish to point out that work must be carried out according to current safety
regulations (e.g., VBG37) in order to prevent accidents. Please carry out the
respective safety measures.
Warranty
Our warranty only applies if an original ConSole complete system is used.
In order to adjust the system optimally for the local conditions and to fulfil all
applicable regulations, we recommend an expert report be prepared if in any
doubt. The installation should be carried out by skilled and trained personnel.
If you have questions concerning training, please contact Renusol.
Installation instruction
Please read these installation instructions carefully before starting installation.
First, familiarize yourself with the system components. The ConSole can be
stored and used at temperatures of between -30° C and +50° C. We recommend
the ConSoles be assembled at plus temperatures. The roof area must in any case
be free of snow and ice.
During the installation and, in particular, while working on the roof, be sure to
observe the relevant health and safety provisions and please follow the current
rules and regulations.
Please also check the current version of our installation instructions on our
website at www.renusol.com. Here, you can also find instructions in other
languages, if required. The figures and texts in the installation instructions
correspond to current technology at the time of printing. We reserve the right
to make changes.
The installation instructions merely contain recommendations in accordance
with current technology and are based on the experience of how systems made
by Renusol can be installed. If any roof or object-specific characteristics are to be
considered, please, if necessary, involve specialists such as roofers or structural
engineers for the purposes of explanation.
The Renusol team wishes you a successful installation.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renusol ConSole at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renusol ConSole in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info