Manual Renkforce RF1000 (page 99 of 114) (English)

536366

Zoom out

Zoom in

1/114

Method for precise setting of the belt tension

For this, you need a weight of 1 kg, such as a water bottle ﬁlled with water to reach the speciﬁed weight of 1 kg. You also need a

cord for attachment.

Fasten the heating plate with adhesive tape or similar ﬁrst to keep it from falling out and being damaged if the printer

tips.

Place a soft support under the printer so that it is not scratched when tipping and so that it cannot damage the table

top.

Now tip the printer to its front near the edge of the table and

attach the weight to the part of the toothed belt for the X-direc

tion that is now at the bottom using the cord.

The weight must be suspended so that it can move freely.

Measure the distance between the two toothed belt halves as

shown in the ﬁgure. Set a distance of 28 mm with the belt ten

sioner.

Now tip the printer to the right side near the edge of the table

and attach the weight to the part of the toothed belt for the Y-

direction that is now at the bottom using the cord.

The weight must be suspended so that it can move freely. For

this, it must be threaded through an opening in the side part

near the right threaded circulation spindle.

Measure the distance between the two toothed belt halves as

shown in the ﬁgure. Set a distance of 30 mm with the belt ten

sioner.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF1000 in the language / languages: English as an attachment in your email.

The manual is 8,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF1000

Renkforce RF1000 User Manual - German - 104 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce RF1000 Manual

Product: