536366
85
Zoom out
Zoom in
Previous page
1/114
Next page
85
(1) The starting code contains the first commands that the 3D printer performs. Here, e.g. a Z-compensation can be started.
The Z compensation is unnecessary if the distance between the extruder nozzle and heating plate is set manually with the
buttons of the operating fields (as described before when starting a printing process).
Procedure
for determination of the correct command:
Move the printer to the home position.
Switch o the motors and return to the main menu display.
Move the extruder and the heating plate so that the extruder is placed centrally above the heating plate.
Place a normal, singly folded printer paper (80 g/m²) between the extruder and heating plate.
Move
the heating plate with the buttons for the heating plate movement up until the paper can just be moved. A distance of
approx. 0.2 mm is set here.
Do not move the heating plate up too far. Danger of breaking the heating plate!
Read the printing plate oset from the home position in the display (Z value in the second display line).
Convert
the oset read to motor steps according to the following formula:
642 x distance value = number of steps to be set
Example: Your measured -0.27 mm >> 642 x (-0.27) = -173.34 steps (also about -173 steps)
This means that the starting code must be moved up by 173 steps (- => up / + => down)
The Z-compensation command then would be:
M3000
M3004 S-173 (-173 is the number of the determined steps for the Z-motor)
(2) The end code will be performed at the end of the print and could contain, e.g. the run into a removal position for the printed
object.
Detailed information on the G-Codes can be found, e.g., in http://reprap.org/wiki/G-code
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF1000 in the language / languages: English as an attachment in your email.

The manual is 8,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF1000

Renkforce RF1000 User Manual - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info