692203
29
Zoom out
Zoom in
Previous page
1/64
Next page
29
14. Preparation
a) Calibrating the print bed
2
Place an A4 sheet of paper between the nozzle
and the print bed to use as a measurement
guide.
Tighten the 3 levelling screws under the print
bed as far as they will go.
1
4
Repeat step 3 for the second, third, and fourth
point (calibration sequence and motion direction of
the nozzle are shown above).
Go to the < ReadyPrint > menu. Select < Set >,
and then select < Levelling >.
Touch < First >. The nozzle will move to the
rst point.
Turn the rst levelling screw to control the
distance between the nozzle and print bed.
The distance should be approximately 0.3 m
(use an A4 sheet of paper as a measurement
aid). The paper should be gently clamped so
that you feel slight resistance when moving the
paper. The nozzle must not touch the print bed!
3
When adjusting the print bed, always ensure that the distance between the nozzle and the print bed is the
same, otherwise the print bed will be uneven and the printed objects will not adhere properly.
If the distance between the nozzle and print bed is too small/large, repeat steps 3 and 4.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL

Renkforce RF100 XL User Manual - German - 62 pages

Renkforce RF100 XL User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info