692203
28
Zoom out
Zoom in
Previous page
1/64
Next page
28
c) Layer thickness
The layer thickness determines the height of the individual layers and therefore the resolution and quality of the
printed object.
Thinner layers produce higher quality prints, but result in longer printing times.
Thicker layers result in lower quality prints and shorter printing times.
Experiment with the aforementioned parameters until the printer produces a satisfactory result for your
chosen material.
Use the PLA lament for the rst few test prints, as this material is easy to handle and does not stick
together when it cools down. It also adheres very well to the print bed.
d) Hot plate temperature (for item no. 1592461)
The optimal hot plate temperature depends on the lament material. Using an optimal temperature ensures that the
printed object adheres well to the hot plate.
When the blue tape runs out, replace it with an identical tape to improve the surface adhesion.
If the temperature of the hot plate is too high, the printed object may become distorted, or the lower layers may
cool down too slowly.
If the temperature of the hot plate is too low, the printed object may not adhere properly, or the edges may become
loose during printing.
PLA can be printed without the hot plate. The optimal temperature in this scenario is 60 °C.
When printing with PLA (especially with small objects with a small surface area), the hot bed should be
covered with plastering tape or a slightly textured masking tape to improve the surface adhesion.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL

Renkforce RF100 XL User Manual - German - 62 pages

Renkforce RF100 XL User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info