692203
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
Before conducting any repair or modication work, disconnect the printer from the mains and computer
and allow it to cool down.
Do not touch the mains cable if there are any signs of damage. If the mains cable is damaged, isolate
the mains socket (e.g. switch off the circuit breaker and RCD), and then unplug the mains plug from the
mains socket. Do not use the printer with a damaged mains cable.
d) Operation
Do not use the 3D printer outdoors.
Do not use the printer near bath tubs, showers, swimming pools or washbasins. It must not be exposed
to moisture.
Some parts of the printer can become very hot and may cause burns. Exercise caution in the
presence of children and vulnerable people.
The nozzle (for item no. 1891634 and 1592461) and hot plate (for item no. 1592461) become very hot
during use. Never touch these parts during or shortly after use. Allow them to cool down sufciently
(approx. 60 mins).
Do not place any objects on the printer, as this may cause it to overheat. Never cover the printer during
use.
Never place your hands inside the 3D printer during use. The printer contains
moving mechanical parts that may cause an injury.
Before conducting any repair or maintenance work, disconnect the printer from the power supply (unplug
the power adapter) and allow it to cool down.
The printer makes a noise during use and may produce an odour depending on the type of lament
material used. Bear these points in mind when selecting a setup location and choosing the lament
material. Ensure that there is sufcient ventilation, or install an extraction system. Avoid inhaling the
vapours produced by the printer. Other lament materials that are not recommended may produce
poisonous vapours or gases.
Do not operate the device when it is unattended.
Only use the product in temperate climates. It is not suitable for use in tropical climates.
Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated may destroy the product. Allow the product to reach room temperature before
connecting it and putting it to use. This may take several hours.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce RF100 XL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce RF100 XL in the language / languages: English as an attachment in your email.

The manual is 7,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Renkforce RF100 XL

Renkforce RF100 XL User Manual - German - 62 pages

Renkforce RF100 XL User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info