668080
31
Zoom out
Zoom in
Previous page
1/36
Next page
Network configuration 31
Renkforce PL500D WiFi
WiFi Move support enabled
You can enable synchronisation of the WiFi settings either by using
the func-
tions in this menu or by pressing the respective PLC
button on the correspon-
ding adapters.
To learn how to synchronise the WiFi settings
at the touch of a button, refer
to Chapters 'Connecting the adapter'.
Switch on WiFi Move Technology (if necessary) by
clicking/tapping under
WLAN configuration d WiFi Move. All WiFi adapters are now continuously
connected to each other and, from now on, share changes to the WiFi confi-
guration with each other automatically.
In addition, you can see when the last synchronisation took
place and which
devices are connected via WiFi Move Technology.
4.5.8 WiFi Clone
WiFi Clone lets you apply the WiFi access data of an existing WiFi access
point (such as your WiFi router) at the touch of a button. Start the procedure
with the Start setup option and then press the WPS button of the device with
the WiFi access data (SSID and WiFi password) to be applied.
4.6 Management
In the Management area you can reset the current configuration to the fac-
tory defaults, save it to your computer as
a file or restore it from there and
update the firmware of the PL500D WiFi.
4.6.1 Resetting the configuration
With the Management -> Reset configuration command, the PL500D WiFi
is reset to the original factory defaults. In doing so, you lose your personal
settings. The last-assigned PLC password for the PL500D WiFi is also reset
to th
e PLC standard password HomePlugAV. To secure your PLC network
individually again, reconf
igure it by using either the encryption button (see
Chapter 'Configuring the PLC network').
You can change the PLC password by using the
configuration software under
Device configuration -> PLC settings or by using the encryption button.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce PL500D WiFi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce PL500D WiFi in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info