668080
29
Zoom out
Zoom in
Previous page
1/36
Next page
Network configuration 29
Renkforce PL500D WiFi
has to be enabled and an active Internet connection is also required (see
'Time server'). The time server is enabled by default.
To be able to use the Wi-Fi time control, enable the option Enable time con-
trol. The time control automatically switches you
r wireless network on and off
at certain times of the day.
You can define two time periods during which your wireless
network is to be
enabled for each weekday. Then the time control automatically switches the
wireless network on or off.
Keep in mind that, as long as the PL500D WiFi registers connected stations,
the wireless network
remains enabled. The wireless network is not switched
off until the last station has logged off.
Manually switching the access point on or o
ff (i.e. using a button) always has
priority over automatic time control. The configured time control would take
effect automatically during the next defined time period.
4.5.6 Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is one of the international encryption standards
developed by the Wi-Fi Alliance for easily and quickly setting up a secure
wireless network. The encryption keys of the respective WLAN client are
transmitted automatically and continuously to the other WLAN client(s) of the
wireless network. The PL500D WiFi offers two different variants for transmit-
ting these encryption keys:
WPS via PBC (Push Button Configuration):
Start the encryption process on the PL500D WiFi
either by pressing the WPS button on the front panel of the device
or
by pressing the Start setup button on the user interface under WLAN
configuration -> Wi-Fi Protected Setup (WPS).
Then press either the WPS key of the WL
AN client you are adding or the
WPS button on the configuration interface. Now the devices exchange
their encryption keys and establish a secure WLAN connection. The
WLAN LED on the front panel indicates the synchronisation process by
flashing.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce PL500D WiFi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce PL500D WiFi in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info