Manual Renkforce FT0076 - 1380335 (page 41 of 92) (English, German, Dutch, French)

668082

Zoom out

Zoom in

1/92

Ending the alarm sound at temperature alarm

An alarm sound is only emitted when the threshold has been exceeded or

undercut for more than 10 minutes.

 Thispreventstoo-frequenttriggeringofthealarmsoundatslightuctuations

around the threshold.

When the alarm sound is output, the icon " " (10) for the respective channel (1 or 2)

andtherespectivethresholdwillashatthesametime.Thisway,youcantellquickly

which threshold has tripped the alarm.

Endthealarmsoundbybrieypushinganybutton.Thesymbol" " (10) and the threshold

continuetoashuntilthethresholdisnolongerexceeded/undercut.

g) Temperature Calibration

The temperature display on the basis station can be calibrated. This means that the

deviation from a reference value (e.g. a high-quality temperature meter) can be corrected

by adding or subtracting a value for the display.

Observe:

The temperature display on the outdoor sensor display cannot be calibrated.

After calibrating the temperature display in the display of the basis station, the

display of the outdoor sensor will show a dierent temperature.

Proceed as follows:

• Pushthebutton"CHANNEL/+"(16)brieyrepeatedlyuntilthearrowsymbol(8)isshown

to the right of the channel number 1 or 2 or the indoor sensor "IN" (when outdoor sen-

sors with channels 3 - 8 are signed on, select the corresponding channel number).

• Pressandholdthetwobuttons"ALARM/ADJUST"(15)and"CHANNEL/+"(16)together

for 5 seconds.

 Thetemperaturevaluestartstoash.

• Changethetemperaturevaluewiththebutton"CLEAR/-"(14)or"CHANNEL/+"(16).

Keep the respective button pressed for quick adjustment.

• Ifyouwanttoresetthetemperaturevaluetotheuncalibratedstartingvalue,briey

pushthebutton"ALARM/ADJUST"(15).

• Tosavethecalibratedvalueandtoleavesettingmode,keep thebutton"ALARM/

ADJUST"(15)pushedfor3seconds.

The setting menu is terminated automatically if no button is pushed for a few

seconds. The basis station assumes the previous settings then.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce FT0076 - 1380335 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce FT0076 - 1380335 Manual

Product: