Manual Renkforce AR-2808 (page 53 of 124) (English, German, Dutch, French)

651424

Zoom out

Zoom in

1/124

2. Press the doorbell key to select output mode 1.

Power indicator LED 1 lights up. After approx. 2 seconds, 2 beeps sound to conrm the

selection.

3. Scan the master card 1x to exit programming mode.

2 beeps sound. This conrms that the product is in normal operation mode.

Output mode 2 - Set period from 1 to 60 seconds (door lock pulse)

1. Scan the master card 3x to

activate program group 3

2. Select output

mode 2

3. Period setting

start

4. Period setting

stop

5. Exit programming

mode

1. Scan the master card 3x to activate program group 3.

The blue status LED ashes during programming and the 3 power indicator LEDs lights

up. After approx. 2 seconds, 2 beeps sound for conrmation and power indicator LEDs

1 and 2 ash to indicate the 2 available output modes.

2. Press the doorbell key to select output mode 2.

Power indicator LED 2 lights up. After approx. 2 seconds, 2 beeps sound to conrm the

selection.

3. Press the doorbell key again to start the period setting.

The period is indicated by 1 beep per second. The 5 power indicator LEDs function here

as an indicator of time from 1 to 5 seconds on the rst pass, 6 to 10 seconds on the

second past, etc., up to 60 seconds.

4. Press the doorbell key again to stop the period setting once the desired time is

reached.

2 beeps sound to conrm the setting and the LED stops at the corresponding position.

Repeat steps 3 and 4 to adjust the period setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce AR-2808 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce AR-2808 Manual

Product: