Manual Renkforce AR-2808 (page 52 of 124) (English, German, Dutch, French)

651424

Zoom out

Zoom in

1/124

The LED of the selected memory group lights up. After approx. 2 seconds, 2 beeps

sound to conrm the selection.

4. Press the doorbell key again to erase the memory group.

The LED of the selected memory group ashes while the group is being erased. 2 beeps

sound to conrm the group has been erased.

Repeat steps 3 and 4 to erase additional memory groups.

5. Scan the master card 1x to exit programming mode.

2 beeps sound. This conrms that the product is in normal operation mode.

Once a memory group has been erased, it is necessary to re-register all

user cards in this memory group. Follow the instructions under Program

group 1 - Registering access cards.

Program group 3 - Output mode for the electronic door lock

Operation for the door lock can be set to Start/Stop or to a period of 1 to 60 seconds.

The default setting is 2 seconds.

Output mode 1 - Start/Stop

1. Scan the master card 3x to

activate program group 3

2. Select output

mode 1

3. Exit programming

mode

1. Scan the master card 3x to activate program group 3.

The blue status LED ashes during programming and the 3 power indicator LEDs lights

up. After approx. 2 seconds, 2 beeps sound for conrmation and power indicator LEDs

1 and 2 ash to indicate the 2 available output modes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce AR-2808 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce AR-2808 Manual

Product: