700338
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
FIGURES (P. 28-30)
CONNECTIONS AND CONTROLLERS (FIG. 1)
(1) Power-/Protection-LED
(2) Highpass lter controller CH1/2
(3) Selector FULL / HPF (Highpass) CH1/2
(4) Gain level controller CH1/2
(5) Audio signal inputs CH1/2
(6) Audio signal outputs to run additional ampliers
(7) Audio signal inputs CH3/4
(8) Gain level controller CH3/4
(9) Bass Boost selector CH3/4
(10) Lowpass lter controller CH3/4
(11) Selector FULL / HPF (Highpass) / LPF (Lowpass) CH3/4
(12) Highpass lter controller CH3/4
POWER SUPPLY AND TURN ON CONNECTION (FIG. 2)
(1) GND terminal for the ground
(2) REM terminal for the turn on connection
(3) +12 V terminal for the positive-connection of the battery
(4) Vehicle’s battery
(5) In-Line Fuse (not included in the scope of delivery)
(6) Turn on wire from the headunit or the electrical antenna
(7) Fuse(s)
4-CHANNEL OPERATION STEREO (FIG. 3)
If you want to run the amplier with the 4 line output channels* from the headunit to drive 4 loudspeakers, in
stereo connect the following setup:
(1) To the headunit, line output left FRONT CH1
(2) To the headunit, line output right FRONT CH2
(3) To the headunit, line output left REAR CH3
(4) To the headunit, line output right REAR CH4
(5) Loudspeaker left REAR CH3
(6) Loudspeaker right REAR CH4
(7) Loudspeaker left FRONT CH1
(8) Loudspeaker right FRONT CH2
3-CHANNEL OPERATION STEREO & MONO (FIG. 4)
If you want to run the amplier with the 4 line output channels* the headunit to drive a pair of loudspeakers and
a subwoofer, connect the following setup:
(1) To the headunit, line output left FRONT CH1
(2) To the headunit, line output right FRONT CH2
(3) To the headunit, line output left REAR CH3 or subwoofer output
(4) To the headunit, line output right REAR CH4 or subwoofer output
(5) Loudspeaker left FRONT CH1
(6) Loudspeaker right FRONT CH2
(7) Subwoofer
* If your headunit only have 2 output channels, use commercially available Y-adapters for splitting the signal.
But then the FADER function of the headunit does not work anymore.
IMPORTANT!
Always observe the correct polarity of all connections!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renegade RXA1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renegade RXA1100 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info