726816
88
Zoom out
Zoom in
Previous page
1/120
Next page
System separation underfloor heating
Activation if a mixed heating cycle is separated by a heat exchanger.
If system separation is activated, the set temperature is increased.
Menu item Parameter Factory setting
System separation FBH
Deactivated
Deactivated
Activated
Setpoint increase
After activating the system separation it is possible to select a setpoint increase, in order to balance the heat
losses with a heat exchanger
.
Menu item Parameter Factory setting
Setpoint temperature 0 - 10 5.0 K
Setting the building time constant
The building time constant specifies the ability of the building to retain heat. The building time constant is
dependent upon the type of building (see table). The value is also dependent on individual temperature per-
ception, and so the information in the table should only be treated as a guide.
Recommended are:
Building
type
Heat retention ability
Recom-
mended value
Light Low heat retention ability, e.g. prefab/wood-frame houses approx. 10 h
Medium Moderate heat retention ability, e.g. house made from hollow blocks approx. 20 h
Heavy High heat retention ability, e.g. brick house approx. 30 h
Very heavy Very high heat retention ability, e.g. exterior and interior walls > 30 cm approx. 60 h
Passive Well-insulated, e.g. zero-energy housing approx. 100 h
Menu item Parameter Factory setting
Building time constant 0 - 100 h According to design! - 10 h
REMKO Smart-Control Touch
88
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO Smart-Control-Touch SQW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO Smart-Control-Touch SQW in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO Smart-Control-Touch SQW

REMKO Smart-Control-Touch SQW User Manual - German - 80 pages

REMKO Smart-Control-Touch SQW User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info