726816
85
Zoom out
Zoom in
Previous page
1/120
Next page
Operating mode
Two operating modes are available:
1. Bivalent alternative
2. Monoenergetic
Menu item Parameter Factory setting
Operating mode selection
Monoenergetic
Monoenergetic
Bivalent alternative
Selection of the auxiliary heat generator:
- Bivalent alternative (heat pump or oil/gas-fired boiler or wall heating)
- Monoenergetic (heat pump and/or Smart Serv electric heating element) according to usable limits
The operating mode of the internal pump in the indoor unit must be defined here in the level “Expert " Set-
tings " Auxiliary heat generator "
Internal pump".
Domestic hot-water heating
Optionally, you can activate or deactivate the "Domestic hot-water heating" function. Activate domestic hot-
water heating if domestic water has to be heated for washing or showering. When this function is activated,
the associated parameters are then queried. Pay attention to information on the display
.
Menu item Parameter Factory setting
Domestic hot-water heating
Activated
Deactivated
Deactivated
Storage tank set temperature
Desired temperature for the domestic hot water.
If there is a solar yield, the storage tank can become substantially warmer
. The maximum temperature for
solar charging can be modified under Settings/Solar/Storage tank.
For efficiency reasons, the lowest possible set temperature should be selected. If the available quantity of
hot water is insufficient, the value should be increased. Pay attention to the maximum temperature of the
heat pump.
Menu item Parameter Factory setting
Storage tank set temp. 40 °C - 65 °C Factory recommendation 45°C
Hot water circulation
If there is a hot water circulation pump in the building, which you are intending to operate in an energy-
saving manner using the controller
, this function must be activated.
Menu item Parameter Factory setting
Hot water circulation
Deactivated
As required
Activated
85
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO Smart-Control-Touch SQW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO Smart-Control-Touch SQW in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO Smart-Control-Touch SQW

REMKO Smart-Control-Touch SQW User Manual - German - 80 pages

REMKO Smart-Control-Touch SQW User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info