794459
17
Zoom out
Zoom in
Previous page
1/28
Next page
17
Continuous operation with
external condensate outlet
The units are equipped with
a special connection nozzle on the
left side.
A standard 1/2” water hose can
be connected to this.
1. To do this, use a suitable tool
to break the cover [F] out of the
side wall.
Only required for the first
connection!
2. Connect a sufficiently long
and suitable drain hose to the
connection nozzle that is now
exposed.
In unattended permanent
operating mode, the condensate
should preferably be drained into
a lower-level drain.
If using an external collection
container (pan, bucket, etc.),
the unit must be placed
at a correct height.
F
Emptying the condensate
container
The integrated condensate
container must be emptied from
time to time.
Dehumidification mode is switched
off if the condensate container is
full.
The “Container full” indicator light
indicates that the unit has switched
off.
1. Pull the full container forwards
and out carefully.
2. Pour the water into a drain.
3. Re-insert the emptied container
carefully into the unit.
The “Container full” indicator light
extinguishes and the unit
continues to run automatically.
NOTE
The unit can only be started
once the condensate container
has been inserted correctly.
NOTE
After being emptied, the
condensate container incl.
float must be checked for
damage, contamination etc.
There is no unit overflow
protection in this variant.
! CAUTION
Ensure that the drainage hose
is placed at an incline to the
drain to allow the condensate
to drain without hindrance!
! CAUTION
Leakage control device
The unit is equipped with a leaka-
ge control device to prevent dama-
ge in the event of refrigerant loss.
If the unit detects a leak, the
compressor is switched off. The
fan continues to operate without
interruption in order to prevent an
accumulation of refrigerant.
HINWEIS
By switching the compres-
sor off and on again, the unit
initially continues to run in
normal operation until the
leakage control device switch-
es the compressor off again.
A lack of refrigerant can cause
damage to the unit. If a lack of
refrigerant is detected (con-
tinuous fan operation when
the compressor is not running),
the unit must be taken out of
operation immediately!
Work on the refrigerant system
and on the electrical equip-
ment must only be conducted
by a specially authorised
specialist!
The leakage control device
must not be viewed as a
replacement for maintenance
work and damage checks!
! ACHTUNG
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO SERIE ETF 320 ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO SERIE ETF 320 ECO in the language / languages: English as an attachment in your email.

The manual is 2.94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO SERIE ETF 320 ECO

REMKO SERIE ETF 320 ECO User Manual - German - 28 pages

REMKO SERIE ETF 320 ECO User Manual - Dutch - 28 pages

REMKO SERIE ETF 320 ECO User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info