587837
40
Zoom out
Zoom in
Previous page
1/56
Next page
3. Fault code E3: communication error on main board
of the outdoor component
Replace
main board
Does LED1 flash on the
outdoor component
main board?
Establish a proper
connection
Is the electrical
connection between
the power board and
CN4 on the main board
OK?
No
No
Yes
Disconnect the
electrical connection
between the power
board and CN4 on the
main board.
Is there a measurement
of 5V on power board
CN1 between the 3th
and 4th pins?
Replace
main board
Yes
Yes
Is the connection between
the IPM module (positive
terminal) and CN12 on
the power board OK?
No
Establish a proper
connection
Is the connection between
the IPM module (negative
terminal) and CN13 on
the power board OK?
Is there a measurement
of 277-345V between
CN12 and CN13 on
the power board?
Yes
Replace
IPM module
No
Replace power board
No
Establish a proper
connection
Yes
No
Yes
4. Fault code E4: fault on outside temperature
sensor T4 or condenser sensor T3
Connect condenser
sensor properly
Is the condenser
sensor properly
connected?
Replace
sensor
Measure the resistance
of the sensor. (Table 1,
P92-94)
Resistance OK?
No
Yes
Is the outside
temperature sensor
properly connected?
Connect the outside
temperature sensor
properly
Yes
Measure the resistance
of the sensor. (Table 1,
P92-94)
Resistance OK?
Replace sensor
Replace
main board
No
Yes
Yes
No
No
5. Fault code E5: compressor overvoltage protection
Replace supply line
Is the supply line
properly connected and
are there 172-265 V
between L1 and N?
Replace
main board
Replace power board
Does the unit work
after the replacement?
No
Yes
No
REMKO RXT...DC
40
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RXT1401 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RXT1401 DC in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RXT1401 DC

REMKO RXT1401 DC User Manual - German - 56 pages

REMKO RXT1401 DC User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info