726565
20
Zoom out
Zoom in
Previous page
1/76
Next page
4.3 Keys on the remote control
11
9
10
12
13
2
1
4
5
3
6
7
8
14
Fig. 7: Keys on the remote control
1
"ON/OFF" key
Press this key to switch the air conditioning unit on
and of
f.
2
Operating mode selection
This key is used to set the desired operating mode.
The automatic, cooling, dehumidification, heating
and recirculation modes are available.
3
Eco key (sleep mode)
Pressing once activates ECO mode (only available
in cooling mode). As well as the temperature, “eco”
is now shown on the display
. If the target tempera-
ture is set to less than 24 °C, in ECO mode the
temperature is automatically increased to 24 °C
and the fan changes the mode to automatic. If the
target temperature is greater than 24 °C, the set
temperature is retained and the fan speed regu-
lates itself downwards. If you press the ECO key
again, change the function mode or reduce the
target temperature to less than 24 °C, ECO mode
is exited. Press and hold the key for 2 seconds to
activate sleep mode.
During sleep mode, the target temperature
increases automatically by 1 °C within an hour in
cooling mode, and decreases automatically by 1
°C within an hour in heating mode. Press this key
to maintain the most convenient temperature and
save energy. This function is only available in
"Cooling", "Heating" and "Auto" modes. If the unit
is working in "SLEEP" mode, this activity is inter-
rupted by pressing the "MODE", "FAN", "Speed" or
"ON/OFF" keys.
4
“T
imer” key
A switch-on delay and a switch-off delay of the unit
can be programmed with this key. Details of this
can be found in the section “Timer mode”
Ä
‘"Timer" mode’ on page 24
5
"LED" key
This activates/deactivates the display on the indoor
unit.
When the display is switched on again, it flashes
for 15 sec. and then the actual temperature is dis-
played. Then the target temperature appears on
the display and the flashing stops.
6
"FOLLOW ME" key
This key can be used to activate/deactivate the
FOLLOW ME function. In this mode, the room tem-
perature is measured on the remote control. This
sends a signal to the indoor unit every 3 minutes. If
the remote control does not send a signal to the
indoor unit for 7 minutes, this mode is automati-
cally deactivated.
7
"TURBO" key
Activation of the turbo function makes it possible to
reach the setpoint in cooling or heating mode as
fast as possible. Increase noise emission can be
expected.
REMKO RVT series
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RVT 355 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RVT 355 DC in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RVT 355 DC

REMKO RVT 355 DC User Manual - German - 76 pages

REMKO RVT 355 DC User Manual - Dutch - 76 pages

REMKO RVT 355 DC User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info