587902
10
Zoom out
Zoom in
Previous page
1/28
Next page
10
REMKO PGT (E) series
s
s
s
Before the unit start, ensure that the gas supply cylinders are correctly
secured and are not positioned directly in the heat radiated by the units.
The pressurised gas tanks must be positioned to the side/rear of the unit.
Commissioning
Connecting the units
to the electrical power supply
1. Move the operating
switch to the "0"
(Off) position.
2. Connect the unit's power
plug to a properly
installed and fused
mains socket.
230 V/50 Hz.
The units should be checked for
visible defects on the operating
and safety devices as well as
proper installation and correct
electrical and gas connections
before commissioning.
Only a person who has been
adequately trained in the handling
of the units and the use of liquid
gas, pursuant to DGUV 79 may
be tasked with the operation and
monitoring of the units.
Tank gas systems
When connecting the units to tank
gas systems, ensure sufficient pipe
dimensions depending on the pipe
length.
A sufficient gas supply
to the consumer system can
be ensured through the use
of an evaporator.
In order to guarantee the faultless
unit function, it is advisable to
install a permanently set pressure
controller with 1.5 bar outlet
pressure and corresponding gas
throughput (see unit name plate),
as well as a shut-off device tailored
and approved for the respective
pre-pressure.
In order to avoid malfunctions
of the unit’s control and safety
equipment due to harmful
substances such as rust and dust
from the gas supply line or tank(s),
it has proven to be essential to
install gas filters before the control
and safety equipment of the units
(see DIN EN 676 and TRF 88
section 5).
NOTE
The electrical connection for the
units must be made at a separate
feed point with a residual current
device in accordance with
VDE 0100, Section 55.
CAUTION
In the event of defects that en-
danger the operational safety
of the units, operation of the
units must be discontinued im-
mediately and the supervisor
informed!
CAUTION
Pressurised gas tanks must
not lie horizontal when used
during unit operation.
Gas outlet in the liquid phase.
CAUTION
The tanks must never
be heated or de-iced through
the unit hot air flow.
There is a risk of explosion!
NOTE
Installation work on the tank
gas systems and the supply
lines may only be performed
by qualified specialist person-
nel.
CAUTION
Before all work on the gas
supply and when replacing gas
cylinders, all shut-off valves
must be closed and no ignition
sources are permitted in the
immediate vicinity.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO PGT 60E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO PGT 60E in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO PGT 60E

REMKO PGT 60E User Manual - German - 28 pages

REMKO PGT 60E User Manual - Dutch - 24 pages

REMKO PGT 60E User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info