726593
35
Zoom out
Zoom in
Previous page
1/68
Next page
n If the compressor moves to an incorrect fre-
quency range within 15 minutes, a safety shut-
down occurs and the unit shows "E6"
n If there is a malfunction, the malfunction is dis-
played coded. See the "Outdoor unit malfunc-
tion display" table
1
Fig. 22: Check key on the outdoor unit's board
1: Check key
Query operating statuses
The SW1 "Check" key is located on the control board in the outdoor unit. You can use this key to query dif-
ferent operating statuses. Pressing it multiple times takes you to the dif
ferent parameter levels (see table
below):
Item Display Description
0 Standard display Current compr. freq. or malfunct. display
1 Number of indoor units detected Current value
2 Operating mode (coded)
Standby:0, Recirculation mode:1, Cooling
mode:2, Heating mode:3 Force mode for test
purposes:4 Defrosting:5
3 Indoor unit A connected load
The load is displayed in HP. If no unit is con-
nected or detected, the display shows the fol-
lowing: “
――” (2.0 kW=0.8 HP, 2.6kW=1.0 HP,
3.5 kW=1.2 HP, 5kW=1.5 HP)
4 Indoor unit B connected load
5 Indoor unit C connected load
6 Indoor unit D connected load
7 Indoor unit E connected load
8 Indoor unit A power requirement
Current value*HP 2.0 kW=0.8 HP, 2.6kW=1.0
HP
, 3.5 kW=1.2 HP, 5kW=1.5 HP)
9 Indoor unit B power requirement
10 Indoor unit C power requirement
11 Indoor unit D power requirement
12 Indoor unit E power requirement
13 Total power requirement of all indoor units
14
Current frequency requirement depending on the
total power requirement
15 Frequency limit
16 Frequency that is transferred to the compressor
35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MVT 1053 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MVT 1053 DC in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MVT 1053 DC

REMKO MVT 1053 DC User Manual - German - 78 pages

REMKO MVT 1053 DC User Manual - Dutch - 68 pages

REMKO MVT 1053 DC User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info