587703
7
Zoom out
Zoom in
Previous page
1/32
Next page
30 minute intervals within the
following 24 hours.
"TIMER OFF" button
This button serves to program
the automatic shut-off time
in 0.5 h intervals within the
following 24 hours.
"RESET" button
This button resets the remote
control to its factory default
configuration.
"TURBO" button
The TURBO function activates
the maximum fan speed and
the compressor.
"Lock" button
This button can be used to lock
the remote control's keys. An
unintentional adjustment can
be prevented.
"LED DISPLAY" button
This button switches the display
on and off (no influence on
unit function)
“FP” button
This button activates the “frost
protection function”, which
sets the nominal temperature
in heating mode to 6°C. This
function is used to guaranteed
frost protection in unsupervised
rooms. When the FP function
is active, the device switches
heating mode on and at 10°C
switches it off again.
This serves to ensure that
the frost protection limit is
not reached. If “FP” mode is
activated, this is indicated in the
display.
Pressing “ON/OFF”,”MODE”,
“FAN”, “TEMP ▲ ▼ “TIMER
ON/OFF”, FP” will quit the
function.
2. Cooling mode
In this mode, the warm room
air is cooled to the
desired temperature.
3. Dehumidification mode
In this mode
the room is mainly dehumidified
and the adjusted temperature is
maintained.
4. Heating mode
In this mode, the warm air in
the room is heated up to the
desired temperature.
5. Circulation mode
In this mode, the air in the
room is circulated with no
change in temperature.
"FAN" button
Press this button to set the
desired fan speed. 4 speeds
are available: Automatic, high,
medium and low fan speed.
"AIR DIRECTION" button
This button sets the desired
fin position of the exhaust
fins. Various fixed positions
and an oscillating function are
available.
Button "SLEEP"
After pressing this button,
the target temperature in
cooling mode automatically
increases by 1 °C within one
hour. In heating mode, the
target temperature is reduced
by 1 °C within one hour.
"SWING" button
This button directly activates
the oscillating function of the
fins for better air distribution in
the room.
"TIMER ON" button
This button is used to
program the time at which the
unit is automatically activated in
Buttons on the remote control
"ON/OFF" Button
Press this button
to start the unit.
"" button
This button is used to
reduce the desired temperature
to as low as 17 °C.
"" button
This button is used to
increase the desired
temperature
to up to 30 °C.
"MODE" button
Use this button to
select the operating mode.
The indoor unit has 4 modes:
1. Automatic mode
In this mode, the unit works in
cooling or in heating mode.
Buttons on the remote control
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ML522 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ML522 DC in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ML522 DC

REMKO ML522 DC User Manual - German - 32 pages

REMKO ML522 DC User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info