587558
7
Zoom out
Zoom in
Previous page
1/20
Next page
„Cool“ mode
1. Attach the air outlet hose to
the wall bushing or the win-
dow.
2. Activate the device using the
“Power“ button
3. Press the “Mode“ button
until the “Cool“ LED lights
up.
4. Select the fan setting using
the “Fan Speed“ button :
“High“ highest speed
“Med“ medium speed
“Low“ lowest speed
5. If the “Room Temp.“ LED
lights up, the current room
temperature is shown in the
display
6. As soon as the / / button
is pressed, the display switch-
es from the room tempera-
ture to the set temperature
(LED lights up) and shows
the desired temperature for
15 seconds.
7. Set the desired room tem-Set the desired room tem-
perature using the “Timer/
Temp. Adjust“ button /
The up arrow increases the
set value shown in the display
while the down arrow
decreases it.
„Dehumidify“ mode
1. Attach the air outlet hose to the
wall bushing or the window.
2. Activate the device using the
“Power“ button .
3. Press the “Mode“ button
until the “Dehumidify“ LED
lights up; the fan is automati-
cally switched to the “Med“ or
medium fan speed stage.
„Fan“ mode
1. Activate the device using the
“Power“ button .
2. Press the “Mode“ button
until the “Fan“ LED lights
up.
3. Select the fan setting using the
“Fan Speed“ button :
“High“ highest speed
“Med“ medium speed
“Low“ lowest speed
4. The room temperature is not in-The room temperature is not in-
fluenced and remains constant.
For this reason, the tempera-
ture and time setting “Timer/
Temp. Adjust“ buttons /
cannot be used.
„Timer“ time delay
You can turn the device on and off
automatically using the timer. To
do so, an activation/deactivation
delay is programmed.
Automatic activation
1. Activate the device using the
“Power“ button .
2. Select the mode and make all
settings for the desired mode.
3. Deactivate the device using the
“Power“ button .
4. Press the “Timer“ button .
5. Set the time using the “Timer/
Temp. Adjust“ button /
Only whole hours can be en-
tered.
6. The LED flashes.
7. The device activates automati-The device activates automati-
cally at the set time.
Automatic deactivation
1. The device is running in the
previously set mode.
2. Press the “Timer“ button .
3. Set the remaining run time us-Set the remaining run time us-
ing the “Timer/Temp. Adjust“
button / . Only whole hours
can be entered.
4. The LED fleshes.
5. The device deactivates auto-The device deactivates auto-
matically at the set time.
You can achieve a pleasant
room climate by selecting a set
temperature that is a maxi-
mum of 4 to 7°C below the
outdoor temperature.
TIP
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MKT290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MKT290 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MKT290

REMKO MKT290 User Manual - German - 20 pages

REMKO MKT290 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info